Unlike any other structural specification under EN10025 S460 material does not have any direct equivalents in ASTM or Shipbuilding (ABS/BV/LR) designations.
S460NL & S460ML is used in a number of offshore and onshore applications e.g. legs supports for a jack up platform offshore and as mooring piles for a LNG onshore terminal.
Products Description
S460NL
A normalised material with a minimum yield strength of 450 N/mm2 that has been impact tested at -50°C. S460NL is produced under European designation EN10025-3.
S460ML
A thermo-mechanically rolled material with a minimum yield strength of 450 N/mm2 that has been impact tested at -50°C. S460ML is produced under European designation EN10025-4 (TMCP).
Chemical Composition of S460NL & S460ML
| Grade | C | Si | Mn | P | S | N | Al | Cu | Cr | Ni | Mo | Nb | V | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S460NL | 0.20 | 0.60 | 1.00/1.70 | 0.025 | 0.020 | 0.025 | 0.020 | 0.55 | 0.30 | 0.80 | 0.10 | 0.050 | 0.20 | 0.05 |
| S460ML | 0.16 | 0.60 | 1.70 | 0.025 | 0.025 | 0.025 | 0.020 | 0.55 | 0.30 | 0.80 | 0.20 | 0.05 | 0.12 | 0.05 |
Mechanical property
- Mechanical property for S460ML
|
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Impact Energy |
|
(mm) |
MPa (min) |
MPa |
% (min) |
(KV J) (min) |
|
|
-50 degree |
|||||
|
S460ML |
≤16 |
460 |
540-720 |
17 |
27 |
|
16> to ≤40 |
440 |
540-720 |
17 |
27 |
|
|
40> to ≤63 |
430 |
530-710 |
17 |
27 |
|
|
63> to ≤80 |
410 |
510-690 |
17 |
27 |
|
|
80> to ≤100 |
400 |
500-680 |
17 |
27 |
|
|
100> to ≤120 |
385 |
490-660 |
17 |
27 |
- Mechanical properties of grade S460NL (1.8903)
|
Temperature |
-50 |
-40 |
-30 |
-20 |
-10 |
0 |
20 |
|
Notch impact test. Min. absorbed energy |
27 |
31 |
40 |
47 |
51 |
55 |
63 |
|
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 150 |
150 - 200 |
|
ReH - Minimum yield strength (MPa) |
460 |
440 |
430 |
410 |
400 |
380 |
370 |
|
Nominal thickness (mm) |
to 100 |
100 - 200 |
|
Rm -Tensile strength (MPa) |
540 to 720 |
530 to 710 |
|
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 200 |
|
A - Minimum elongation Lo = 5,65 √ So (%) |
17 |
17 |
17 |
17 |
17 |
GNEE are able to supply a wide range of S460 material (in both normalised and TMCP conditions), our material ranges from 6mm to 80mm thick and up to 3 metre's wide and 12 metre's in length.
If you need to learn about or purchase steel products, please feel free to contact us. We will be happy to answer your questions!
Email: alloy@gneesteelgroup.com
Whatsapp (WeChat) :+86-15824687445
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |
