Knowledge

H-beams and I-beams are both rolled steel sections with a similar outline but different geometry: H-beams have parallel, equal-thickness flanges and f

The processing of angles is complex.

C-beam is often found in housing construction, that is to say, this type of steel as a building material to use if there are advantages, it not only h

65Mn steel is used in petroleum, chemical, textile, coal mine support, boiler instrumentation, decoration, construction, hydraulics, medical, electric

Q960E is a quenched and tempered high strength structural steel plate with a minimum yield strength of 960 MPa and impact qualification at -40 °C.

16MnDR is pronounced as 16Mn low capacity, 16Mn means that the carbon content in the steel plate is about 0.16%, D means low temperature and R means p

S355J2 is a non-alloy structural steel plate specified in EN 10025-2 with a minimum yield strength of 355 MPa and impact qualification at -20 °C.

13MnNiMoR steel plate is the steel plate for low and medium temperature pressure vessel.

S355G10+N steel plate grade are S355G7+M, S355G7+N, S355G8+M, S355G8+N, S355G10+M, S355G10+N.

American Standard SA537 series steel plate belongs to carbon-manganese-silicon steel plate, which belongs to the category of container plate.

Wear-resistant steel plate has high wear resistance and good impact performance is good, can be cut, bending, welding, etc.

NM600 is the hardest grade in the low alloy wear resistant steel family covered by GB/T 24186, with a nominal surface hardness in the 570-640 HBW band