Knowledge

Nickel-based alloys are generally referred to as alloys with a Ni content of more than 30 wt%.

12Cr1MoV is a chromium molybdenum vanadium heat resistant alloy steel supplied to GB/T 3077 for high temperature components in power generation, boile

P265GH to EN 10028-2 delivers a minimum yield strength of 265 MPa, a tensile strength of 410 to 530 MPa and 22 percent minimum elongation in the norma

S355K2+N belongs to the European standard low alloy steel plate, S355K2+N steel plate S355 is equivalent to the national standard Q345E, K2 on behalf

S690QL is a quenched and tempered high strength steel plate specified in EN 10025-6 with a minimum yield strength of 690 MPa and impact testing at min

06Ni7DR belongs to steel plate for low temperature pressure vessel.

SA302GrC is the Grade C manganese molybdenum nickel plate of the ASTM A302/A302M specification for pressure vessels, delivered normalized or normalize

S355NL European Standard High Strength Plate is a kind of high quality steel, which is widely used in various engineering and construction fields.

S355JR is a weldable structural steel plate specified in EN 10025-2 with a minimum yield strength of 355 MPa and 27 J impact energy tested at +20 C. I

S355N low alloy steel plate is a high quality steel that is widely used in various engineering and construction fields. It is a low carbon low alloy h

A537CL1 is the Class 1 normalized grade of the ASTM A537/A537M specification for pressure vessel plates, heat treated carbon manganese silicon steel w

The manufacturing route for P355NH plate runs from steelmaking and ladle refining through continuous casting, controlled rolling and normalizing, with