Knowledge

P355NH is a normalized fine grain low alloy pressure vessel steel to EN 10028-3, material number 1.0565, with 355 MPa minimum yield strength and guara

P355NH petrochemical steel plate is a kind of low alloy high-strength steel plate, P in its grade stands for the use of pressure vessels, 355 indicate

P265GH is a non alloy pressure vessel steel specified in EN 10028-2 under material number 1.0425, delivered in the normalized condition with guarantee

18MnMoNbR is a molybdenum and niobium bearing pressure vessel plate supplied under GB/T 713-2014 for boiler drums, reactors and heavy wall vessels. It

15MnNiNbDR is a manganese nickel niobium low alloy steel plate for low temperature pressure vessels, developed to fill the gap between minus 40 C and

Low Temperature Resistant Angle Steel is a special construction structural steel, suitable for construction and engineering in low temperature environ

The yield strength of Q345qC steel I-beam is 345MPa, which is much higher than the strength of ordinary steel.

Q345qC is a bridge structural steel grade specified in GB/T 714, produced as hot rolled H sections to GB/T 11263 or as welded built-up sections to GB/

Q345qD is a structural steel for bridges specified in GB/T 714, supplied as hot rolled I-beams and as welded built-up girders. Compared with a general

Q420B, Q420C, Q420D and Q420E are the four quality classes of high strength low alloy Q420 angle steel under GB/T 1591, with sections supplied to GB/T

Galvanized channel steel is a hot rolled or cold formed U channel protected by a hot-dip zinc coating applied to GB/T 13912 or ISO 1461. On steel thic

H-beams reach the fabrication shop either rolled as one piece or welded from plate to GB/T 33814, and both are welded to structural connections under