65Mn steel, pronounced 65 manganese, is a commonly used spring steel. It has high strength, good hardenability, small tendency to decarburization, good cutting and machining, but there is overheating sensitivity, easy to produce quench cracks, and tempering brittleness. After heat treatment and cold-drawn hardening, the strength is relatively high, with a certain degree of flexibility and plasticity; the same surface state and fully hardened case, the fatigue limit and the colorful alloy springs are equivalent; equivalent to foreign grades: 65 Γ (Kazakhstan), 1065 (U.S.), 080A67 \ EN43E (British).
65Mn spring steel, manganese to improve the hardenability, φ12mm steel oil can be quenched, the surface decarburization tendency is smaller than silicon steel, the comprehensive mechanical properties after heat treatment is better than carbon steel, but there is overheating sensitivity and tempering brittleness.
Mechanical properties of 65Mn steel:
Tensile strength σ b (MPa): 825~925
Yield strength σ s (MPa): 520 ~ 690
Elongation δ 10 (%): 14~21.5
Section shrinkage ψ (%): not less than 10
Hot rolled hardness: 240~270HB
Cold rolled soft state hardness: 190~220HB
Cold rolled hardness: 300~340HB
Heat treatment hardness: 38~60HRC
65Mn steel has excellent comprehensive performance, such as mechanical properties (especially the elastic limit, strength limit, flexural strength ratio), resistance to elastic reduction properties (i.e., resistance to elastic regression properties, also known as anti-relaxation properties), fatigue properties, hardenability, physicochemical properties (heat-resistant, low-temperature, oxidation-resistant, corrosion-resistant, etc.).
Common specifications of 65Mn steel plate:
6mm-20mm*1500mm-2000mm*5500mm-10000mm
20mm-35mm*2000mm-2200mm*10000mm-120000mm
35mm-50mm*2200mm-2500mm*12000mm-15000mm








