Knowledge

This complete technical guide explains what S890Q steel is, its mechanical and chemical properties, fabrication behavior, processing challenges, and t

S890Q and Q890D are high-strength quenched and tempered structural steel plates with minimum yield strength of 890 MPa, representing European (EN) and

Manufactured according to EN 10025-6 and supplied in the quenched and tempered (Q&T) condition, S890Q steel plate offers an outstanding balance of ult

ABS EQ63 and DQ63 are both high-strength, quenched and tempered steel plates for marine/offshore use with 630 MPa yield strength, but the main differe

ABS EQ70 and DQ70 are both high-strength, quenched and tempered shipbuilding steels from the SSAB American Bureau of Shipping (ABS) standard, offering

ABS AH32 and CCS AH32 are essentially the same high-strength, hot-rolled marine steel grade, used for shipbuilding and offshore structures, offering g

2HGr42 and 2HGr50 are grades of high-strength, low-alloy (HSLA) structural steel plates, primarily specified by the American Petroleum Institute (API)

Weldable structural steel plate S355G7+N is under steel standard EN 10225.For the steel plate thickness equal or below 25mm,the minimum yield strength

S355G2+N steel plate belongs to European standard low-alloy high-strength steel, which is welded structural steel for fixed offshore structures, and b

ABS A and B are common, ordinary-strength shipbuilding steels certified by the American Bureau of Shipping (ABS) for hull construction, differing main

S890Q and S960Q are ultra-high-strength structural steels supplied in the quenched and tempered (Q&T) condition under EN 10025-6.

CCS A and CCS B steel plates are common grades of shipbuilding steel from the China Classification Society (CCS), differing mainly in toughness levels