Knowledge

ASTM A204 specification covers molybdenum-alloy steel plates, which is particularly for welded boilers and high temperature pressure vessels.

S460NL & S460ML is used in a number of offshore and onshore applications e.g. legs supports for a jack up platform offshore and as mooring piles for a

S460N and S460NL are weldable EN 10025-3 fine-grain steels with a 460 MPa minimum yield strength, separated only by the guaranteed impact test tempera

S420NL plate is a fine grain structural steel, which is a high strength steel plate under European standard EN 10025.

S355N steel is a structural steel grade. S means structural steel, 355 means min yield strength for thickness less 16mm expressed in Mpa, N means the

S355J2 and S355NL share the same 355 MPa minimum yield strength and 470-630 MPa tensile range, but they are supplied to different standards. S355J2 co

S355J2 and S355K2 steel plates are under same standard, EN10025-2.

S355J2 and S355J0 share 355 MPa yield strength, differing in Charpy impact test temperature of -20 C and 0 C.

S355J2 and S355JR steel materials both comply to european steel specficiation BS EN 10025-2 hot-rolled products for non-alloy structural steels.

A572Gr50 steel plate is a high-strength low-alloy (HSLA) steel commonly used in structural applications. It's known for its good strength, weldability

S355J0 is a weldable low carbon manganese structural steel specified in EN 10025-2 and supplied as standard 1.0553. This guide lists its international

07MnMoVR pressure vessel plate belongs to the national standard special steel plate for boilers and pressure vessels. The implementation standard of 0