
S355J2 and S355K2 steel plates are under same standard, EN10025-2.
EN S355 steel offers high yield (minimum yield strength of 355 N/mm²) and tensile strength. It is a structural grade steel which is widely used in engineering and construction industries.
EN S355 steel can be supplied with a variety of treatments and test options to ensure that it is a highly usable steel in your various projects.
S355J2 and S355K2 steel plates have the same chemical composition and strength as below:
S355J2 and S355K2 steel plates chemical composition:
| Thickness (mm) | C | Mn | Si | P | S | N | Cu |
| under 40 | 0.2 | 1.6 | 0.55 | 0.025 | 0.025 | - | 0.55 |
| >40 | 0.22 |
| ReH Minimum Yield strength (MPa ) | R m (MPa) | ||||||||||||
| for nominal thickness(mm) | for nominal thickness (mm) | ||||||||||||
| <16 | =>16 | >40 | >63 | >80 | >100 | >150 | >200 | >250 | <3 | =>3 | >100 | >150 | >250 |
| ≤ 40 | ≤63 | ≤ 80 | ≤100 | ≤150 | ≤200 | ≤250 | ≤400 | ≤ 100 | ≤150 | ≤250 | ≤400 | ||
| 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 | 265 | 510-680 | 470-630 | 450-600 | 450-600 | 450-600 |
what is the difference between S355J2 and S355K2 steel plates?

It mainly lies in their impact test:
- J2 symbol Charpy V-Notch Impact Tested Longitudinal 27 Joules at -20 ˚C under 150mm thickness.
- K2 symbol Charpy V-Notch Impact Tested Longitudinal 40 Joules at -20 ˚C max 100mm thickness.
S355K2 steel plates Charpy V-Notch Impact Tested Longitudinal 40 Joules at -20°C.
S355J2 steel plates Charpy V-Notch Impact Tested Longitudinal 27 Joules at -20 ˚C under 150mm thickness.
S355K2 steel plates are good in high-impact, low-temperature condition projects.
For more information about the difference between S355J2 and S355K2 steel plates, or even S355J0 and S355JR plates, welcome to consult us.
Email: alloy@gneesteelgroup.com
Whatsapp (WeChat): +86-15824687445
FAQ
Q: What is S355J2 steel?
A: S355J2 is a medium tensile, low carbon manganese steel which is readily weldable and possess good impact resistance (also in sub-zero temperatures). This material is commonly supplied in the untreated or normalized condition. Machinability of this material is similar to that of mild steel.
Q: What is S355 K2?
A: S355K2 is a medium tensile, low carbon manganese steel which is readily weldable and possess good impact resistance (also in sub-zero temperatures). This material is commonly supplied in the untreated or normalized condition. Machinability of this material is similar to that of mild steel.
Q: What is the impact test for S355K2?
A: Grade S355K2 has a minimum yield strength of 355 MPa. The impact energy at a test temperature of -20°C is at least 40 joules.
Q: What is S355J2 N used for?
A: S355J2+N Typical Applications
General Fabrication.
Engineering.
Construction.
Machine Building.
Earth Moving.
Rail Network.
Bridge Building.
Energy.
Q: What is the hardness of S355J2?
A: The S355j2+n Hardness range lies between 150 - 190 brinell, at a thickness less than equal to 16.0 mm. The S355j2+n Plate Thickness can go up to 120 mm. What is S355 J2+N Plate ? The S355J2+N Plates is a low carbon structural steel, which is known for its high tensile strength.
Q: Does S355 steel rust?
A: S355J2 steel has moderate corrosion resistance in atmospheric conditions, making it suitable for outdoor structures. However, it is not recommended for direct exposure to seawater or other highly corrosive environments.
Q: What material code is S355J2?
A: Steel grade S355J2 is an unalloyed welded structural steel with guaranteed impact work at a temperature of -20ºС.
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |





