What is difference between steel materials bs en s355j2 and s355jr ?

Aug 21, 2025 Leave a message

S355J2-N-MTC-steel-plate.pdf

info-266-213

S355J2 and S355JR steel materials both comply to european steel specficiation BS EN 10025-2 hot-rolled products for non-alloy structural steels. These two steel grades S355JR and S355J2 even owned the very similar chemical compositions and yield & tensile strength.

 

The main difference is their application enviroments,steel materials S355J2 have to be done charp V notch impacting test at minus 20 deg. C; however, S355JR no need.So S355J2 steel materials can be used in low temperature surroundings such as deep ocean platforms.

 

So what is the difference between S355JR and S355J2 steel?

 

Chemical composition difference between S355JR and S355J2 steel

 

Grade C Si Mn P S Cu N
S355JR 0.27 max 0.60 max 1.70 max 0.045 max 0.045 max 0.60 max 0.014 max
S355J2 0.24 max 0.60 max 1.70 max 0.035 max 0.035 max 0.60 max 0.014 max

 

Mechanical property differences between S355JR and S355J2 steel

 

Grade Yield strength ReH/(N/mm2) (t≤16mm) min Tensile strength Rm/(N/mm2) (3mm≤t≤16mm) Elongation A/%(3mm≤t≤40mm) min Charpy V test
Temperature/℃ Impact energy (Longitudinal)/J min
S355JR 355 450-680 22 20 27
S355J2 355 450-680 22 -20 27

 

In S355JR and S355J2 steel, JR and J2 indicates the steel needs to do +20℃ impact test and -20℃ impact test respectively.

The different impact temperature is the main difference between S355JR and S355J2 steel. S355J2 steel can better adapt to low temperature work condition than S355JR steel.

 

Email: alloy@gneesteelgroup.com
Whatsapp (WeChat) :+86-15824687445

 

FAQ

Q: What is the difference between S355 Jr. and S355 J2?

A: In addition, people have wondered about the differences between S355J2 and S355JR, and the answer to that can be summed up this way: the different impact temperature is the main difference between the two types of alloy steel.

Q: What is the difference between J2 and JR steel?

A: A JR material is normally used in an internal environment whereas a J2 is for external use. If J2 is required you must not substitute JR.

Q: What does JR mean in S355JR?

A: S355JR is one of the Charpy designations that belongs to structural grade S355 (S). The JR designation confirms that the steel has been subjected to Chary V-Notch longitudinal impact tests at 27J (joules) at room temperature. Other Charpy designations include S355JO, S355J2 y S355K2.

Q: What is S355J2 steel?

A: S355J2 is a medium tensile, low carbon manganese steel which is readily weldable and possess good impact resistance (also in sub-zero temperatures). This material is commonly supplied in the untreated or normalized condition. Machinability of this material is similar to that of mild steel.

Q: What is the Chinese equivalent of S355JR?

A: Q345B steel
And Q345B steel is undoubtedly the EN 10025 S355JR equivalent grade in China.

 

Other steel plate
Name Material Specification (mm) Tons Remark
Low Alloy Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo 6 - 350 5788.56 Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection
Pressure Vessel Plate Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) 3 - 300 8650 Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection
High-Strength Plate WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E 8 - 120 3086.352 Quenched and tempered
Wear-Resistant Plate NM360, NM400, NM450, NM500 6 - 150 3866.297 Quenched and tempered
Bridge Plate Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 8 - 200 2853.621 Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness