P265GH weldable pressure vessel and boiler steel

EN 10028-2 P265GH steel is the Heat Resistant Pressure Vessel Steels defined in the EN 10028 system. It is a non-alloy steel. The material is designed for high temperature applications. Therefore it is mostly utilized in high temperature applications in the oil and gas sector, chemical processing industries and petrochemical sectors.

Pressure vessels and boiler components operate at moderate temperatures.

Heat exchangers.

Storage tanks.

Components for power generation, chemical, petrochemical, and food processing industries.

Widely used for general pressure containment where high-temperature creep resistance is not a primary requirement.

Weldability:

Generally considered to have good weldability due to its relatively low carbon equivalent (Ceq). Common welding processes can be used.

Preheating may be recommended for thicker sections or high restraint joints to avoid hydrogen cracking.

Post-Weld Heat Treatment (PWHT) is often specified to relieve residual stresses, particularly for thicker components (>30-35mm), highly restrained joints, or critical service applications.

EN10028-2 P265GH Boiler steel plate,EN10028-2 P265GH Pressure Vessel Steel plate, EN10028-2 P265GH Storage Tanks Steel plate. EN10028-2 P265GH Heat Exchanger Steel Plate .

UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.

Request A Quote

If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.

What is en 10028-2 P265GH equivalent to?

ASTM A516 GR60 steel

Considering pressure purposes and yield strength and mechanical property minimum values,In standard specification BS EN 10028-2 P265GH steel plate is equivalent to ASTM A516 GR60 steel plate.

What is EN 10028-2 P265GH steel?

EN 10028-2 P265GH steel is the Heat Resistant Pressure Vessel Steels defined in the EN 10028 system. It is a non-alloy steel. The material is designed for high temperature applications. Therefore it is mostly utilized in high temperature applications in the oil and gas sector, chemical processing industries and petrochemical sectors.

What is the maximum temperature for P265GH?

P265GH – heat-resistant pressure vessel steel
P265GH is a non-alloy steel. The unalloyed steel is designed for use in continuous operation up to approx. 400 °C and for pipes up to approx. 450 °C wall temperature.