P355QL2 Boiler Steel Plate

P355QL2 Boiler Steel Plate

Thickness: 8–200 mm
Width: 1000–4200 mm
Length: 5000–18000 mm
Send Inquiry
Chat Now
Description
Technical Parameters

What Is P355QL2 Boiler Steel Plate?

When a vessel is designed for −60 °C, the steel is no longer chosen for strength - every 355 MPa grade in the family offers that. It is chosen for what the Charpy specimens absorb at the coldest metal temperature the equipment will ever see, and on that measure P355QL2 is the deepest-temperature branch EN 10028-6:2017 offers at this strength level. Registered as material number 1.8869 and delivered only in the quenched and tempered condition, it guarantees 27 J minimum average at −60 °C on transverse specimens.

Beneath that number sit two deliberate choices in the standard. The impact test temperature moves down to −60 °C, and the sulphur limit is tightened to 0.005 % - a third of what plain P355Q allows. Both exist because cleavage fracture starts at inclusions and grain boundaries, and both become decisive exactly where the equipment spends its life: refrigerated storage, cold-climate installations, and the start-up or upset conditions that take a vessel colder than its process data sheet suggests.

P355QL2 Boiler Steel Plate

 

P355QL2 Steel Plate Chemical Composition

Ladle analysis, maximum %, per EN 10028-6:2017:

C Si Mn P S N B Cr Cu Mo Nb Ni Ti V Zr
0.16 0.40 1.50 0.020 0.005 0.015 0.005 0.30 0.30 0.25 0.05 0.50 0.03 0.06 0.05

The sulphur figure is the one to read carefully, because it changes with the temperature branch:

Branch Test temperature P max % S max %
P355Q / P355QH −20 °C 0.025 0.010
P355QL1 −40 °C 0.020 0.008
P355QL2 −60 °C 0.020 0.005

 

P355QL2 Boiler Plate Mechanical Properties (+QT, Room Temperature)

Guaranteed minimum values, transverse test pieces:

Thickness (mm)
P355QL2 ≤ 50 > 50 ≤ 100 > 100
Yield strength (≥Mpa) 355 335 315
  ≤ 100 > 100
Tensile strength (Mpa) 490-630 450-590

 

Impact Toughness of P355QL2 Steel Plate

Charpy V-notch energy, minimum average of three transverse specimens:

Test temperature −60 °C −40 °C −20 °C 0 °C
Min. average energy (J) 27 40 60 80

 

P355QL2 Boiler Steel Plate Specifications 

Item GNEE supply range
Thickness 8–200 mm
Width 1000–4200 mm
Length 5000–18000 mm
Stock sizes 10–50 mm × 2000 mm × 6000 mm held routinely
Delivery condition Quenched and tempered (+QT) only
Tolerances EN 10028-1; plates under 40 mm normally sheared or flame cut

 

P355QL2 Plate Typical Applications

  • Refrigerated and low-temperature storage tanks for liquefied gases in the −40 to −60 °C band
  • Low-temperature gas transport and mobile tanks rated to −60 °C metal temperature
  • Cold-climate and arctic installations - separators, scrubbers and pressure vessels exposed to ambient extremes
  • Boilers and pressure vessels with a cold hydrotest or cold-start case, where the test temperature, not the process temperature, sets the material requirement
  • Petrochemical low-temperature separation and gas-treatment equipment

P355QL2 Plate Typical Applications

 

Welding and Heat Treatment of P355QL2 Plates

  • Preheat typically 125–175 °C, set by carbon equivalent and combined thickness and confirmed on the qualified WPS.
  • Post-weld heat treatment normally 580–620 °C, and always below the tempering temperature used at the mill - exceed it and the quenched and tempered properties, including the −60 °C toughness, are lost.
  • Heat input and interpass control matter more on L grades than on ordinary QT plate, because the heat-affected zone is where toughness is easiest to lose.
  • Consumables must match the QT condition and the low-temperature requirement, not merely the room-temperature strength class.

 

Why Choose GNEE for P355QL2?

  1. Welding support before you cut plate: send the WPS and our engineers check preheat, interpass and PWHT against the mill tempering temperature.
  2. Export experience: GNEE Steel has shipped plate since 2008 to more than 70 countries, with marking, packing and documentation matched to the destination.
  3. GNEE Steel operates multiple large-scale warehousing facilities, maintaining extensive ready-to-ship steel plate inventories across a wide range of grades, thicknesses, and widths. We accommodate diverse procurement scales-offering rapid delivery for small-batch orders and scheduled production for large volumes-without the constraints of rigid minimum order requirements.
  4. Supported by comprehensive steel processing centers, GNEE Steel provides value-added services such as leveling, cutting, precision sizing, and plasma cutting. Customers can put the materials directly into production upon receipt, eliminating the need for secondary processing and thereby saving on both processing costs and labor time.

P355QL2 Boiler Steel Plate warehouse

P355QL2 Boiler Steel Plate cutting

Send your WPS - our engineers check preheat and PWHT against the tempering temperature before you cut the first plate.

 

FAQ

Is the −60 °C impact test actually performed, or is it a tabulated value?
It is a required test. EN 10028-6 specifies impact testing at −60 °C for P355QL2, and the results are reported on the certificate. State the temperature and, if the specification calls for it, the higher 40 J requirement at enquiry stage.

Why is the sulphur limit lower than on P355Q?
Sulphide inclusions initiate cleavage fracture. As the guaranteed impact temperature drops, the standard tightens the limit: 0.010 % on Q and QH, 0.008 % on QL1, 0.005 % on QL2.

Does P355QL2 have weathering or atmospheric-corrosion resistance?
No. It is a pressure-purpose steel with no atmospheric-corrosion guarantee. Outdoor and corrosive service is handled by coating, cladding or corrosion allowance.

Can P355QL2 be used for LNG containment at −162 °C?
No. That temperature range belongs to 9 % nickel steel, austenitic stainless or aluminium alloys, not to this grade.

Hot Tags: p355ql2 boiler steel plate, China p355ql2 boiler steel plate manufacturers, suppliers, factory, stainless steel pressure vessel, Boiler Steel, P275NH Steel, sa516 70 plate, EN10028 Pressure Vessel Steel, P460NL1 P460NL2 Boiler Quality Steel Plates