What 15CrMoR Is
15CrMoR is a chromium-molybdenum alloy steel plate for pressure vessels. The designation follows the vessel convention, with the leading figure indicating the nominal carbon content, Cr and Mo identifying the two principal alloying elements and the final R marking steel for pressure vessels. The chemistry places it in the Cr-Mo family of elevated temperature vessel steels, whose international counterpart is the ASME SA387 Gr12 Cl2 type of chrome-molybdenum plate for welded pressure vessels.
The reason Cr-Mo steel exists is service temperature and hydrogen. Plain carbon and manganese vessel steels lose strength quickly as temperature rises and are vulnerable to hydrogen attack in hydroprocessing service. Adding chromium with a smaller molybdenum addition produces carbides that are stable at temperature, which raises the creep resistance and protects the steel against hydrogen attack in the conditions found in refining and petrochemical plants.
Standard System and Ordering
15CrMoR plate is produced to GB/T 713.2-2023, the part of the steel plate and strip standard for pressure equipment that covers non-alloy and alloy steels with specified temperature properties. The specification sets out grade representation, ordering content, dimensions, shape and mass, technical requirements, test methods, inspection rules, packaging, marking and quality certificate content, and it is the controlling document for chemistry window, delivery condition and mechanical property acceptance.
A purchase order should state the grade, delivery condition, plate size, impact test temperature and energy level, ultrasonic testing class and any supplementary requirement such as simulated post-weld heat treatment of test pieces or restriction of residual elements for hydrogen service.
Chemical Composition
| Element | Typical requirement (%) |
|---|---|
| Carbon | 0.12 to 0.18 |
| Silicon | 0.15 to 0.40 |
| Manganese | 0.40 to 0.70 |
| Chromium | 0.80 to 1.20 |
| Molybdenum | 0.45 to 0.60 |
| Phosphorus | 0.020 maximum |
| Sulphur | 0.010 maximum |
Carbon is kept low enough to preserve weldability and toughness while still allowing the chromium and molybdenum carbides to form. Chromium at roughly one percent provides the elevated temperature strength and hydrogen resistance, and molybdenum in the 0.45 to 0.60 percent band strengthens the matrix and improves creep behaviour. Phosphorus and sulphur are held at low levels because both damage toughness, and sulphur in particular raises the risk of lamellar tearing in thick welded joints.
Mechanical Performance and Delivery Condition
| Property | Typical requirement |
|---|---|
| Tensile strength | 450 to 590 MPa |
| Yield strength, up to 60 mm | 295 MPa minimum |
| Yield strength, over 60 mm to 100 mm | 280 MPa minimum |
| Elongation after fracture | 19 % minimum |
| Charpy V-notch impact energy at 20 degrees Celsius | 47 J minimum |
| Bend test | 180 degree bend, D = 3a |
The plate is normally supplied in the normalised plus tempered condition, or cooled and tempered, so that the microstructure is stable for elevated temperature service. Thick plate may be supplied with an accelerated cooling and tempering route when agreed between purchaser and supplier.
Fabrication and Applications
15CrMoR shows good hot and cold processing behaviour and welds with matched Cr-Mo consumables under controlled preheat and interpass temperature, followed by post-weld heat treatment where the design requires it. Its resistance to hydrogen sulphide corrosion makes it a routine choice for the wet, sour conditions found in refineries.
Typical components include reactors, heat exchangers, separators and drums in large petrochemical complexes and thermal power stations, as well as equipment in coal conversion and fertiliser plants where both pressure and temperature are moderate but the service environment is aggressive.
Frequently Asked Questions
Q: What is the international counterpart of 15CrMoR?
A: It corresponds to the SA387 Gr12 Cl2 type of chrome-molybdenum steel plate for welded pressure vessels.
Q: Which standard governs 15CrMoR plate?
A: GB/T 713.2-2023, covering non-alloy and alloy steel plates and strips for pressure equipment with specified temperature properties.
Q: Why is chromium added to this vessel steel?
A: Chromium forms stable carbides that maintain strength at elevated temperature and protect the steel against hydrogen attack.
Q: How is the plate delivered?
A: Normally in the normalised plus tempered condition, or in a cooled and tempered condition for thicker plate, as agreed in the order.
Q: What is the plate mainly used for?
A: Reactors, heat exchangers, separators and drums in petrochemical and thermal power service, especially where hydrogen sulphide is present.






