Boiled Steel Plate And Killed Steel Plate

Apr 12, 2024 Leave a message

1. Boiled steel plate is a steel plate made of hot-rolled ordinary carbon structural steel and boiled steel. Boiling steel is a kind of steel with incomplete deoxidation. Only a certain amount of weak deoxidizer is used to deoxidize the molten steel. The molten steel contains high oxygen. When the molten steel is injected into the steel ingot mold, the carbon-oxygen reaction produces a large amount of gas, causing the molten steel to boil. , from which boiling steel gets its name. The carbon content of boiling steel is low. Since ferrosilicon deoxidation is not required, the silicon content in the steel is also low (Si<0.07%). The outer layer of boiling steel is crystallized under the conditions of violent stirring of liquid steel caused by boiling. Therefore, the surface layer is pure and dense, with good surface quality, good plasticity and stamping performance, and no large concentrated shrinkage holes or cut ends. Less, high yield rate, simple boiling steel production process, less ferroalloy consumption, and low steel cost. Boiled steel plates are widely used in the manufacture of various stamping parts, construction and engineering structures and some less important machine structural parts. However, there are more impurities in the core of boiling steel, the segregation is more serious, the structure is not dense, and the mechanical properties are uneven. At the same time, due to the high gas content in steel, the toughness is low, the cold brittleness and aging sensitivity are high, and the welding performance is also poor. Therefore, boiled steel plates are not suitable for manufacturing welded structures and other important structures that bear impact loads and work under low temperature conditions.

plate

 

2. Killed steel plate is a steel plate made by hot rolling of ordinary carbon structural steel and killed steel. Killed steel is completely deoxidized steel. The molten steel is fully deoxidized with ferromanganese, ferrosilicon and aluminum before pouring. The oxygen content of the molten steel is low (generally 0.002-0.003%), and the molten steel is relatively calm in the ingot mold. There is no boiling phenomenon, hence the name of killed steel. Under normal operating conditions, there are no bubbles in the killed steel, and the structure is uniform and dense; due to the low oxygen content, there are fewer oxide inclusions in the steel, higher purity, and less cold brittleness and aging tendency; at the same time, the segregation of the killed steel is small, The performance is relatively uniform and the quality is high. The disadvantages of killed steel are concentrated shrinkage cavities, low yield, and high price. Therefore, killed steel is mainly used for components that withstand impact at low temperatures, welded structures and other components that require higher strength.

plate

Low alloy steel plates are both killed steel and semi-killed steel plates. Due to its high strength and superior performance, it can save a lot of steel and reduce the weight of the structure, and its application has become more and more widespread.

plate