Boron-alloyed Steel 33MnCrB5-2 +QT +SH

Mechanical manufacturing field

33MnCrB5-2 alloy steel plates feature high strength, high wear resistance, and high harden ability, and are widely used for bearings and gears of rotating machinery, as well as valve bodies, pumps and accessories, wheels, bolts, studs, etc.

In addition, 33MnCrB5-2 alloy structural steel, with its characteristics of high strength, high toughness, good harden ability and wear resistance, is used in mechanical manufacturing to make gears, connecting rods, tools, molds and other parts.

Automotive and transportation field

33MnCrB5-2 high alloy steel plates are often used in automobile manufacturing and can be made into parts such as crankshafts, axles, and gears, which need to have high strength and toughness. In terms of railway transportation, 33MnCrB5-2 alloy steel plates can be used to manufacture related mechanical parts after quenching and tempering.

Aerospace and military field:

33MnCrB5-2 alloy special steel plates are often used to manufacture parts of aircraft and military equipment, such as gears, shafts, and engine parts, due to their excellent wear resistance and fatigue resistance.

Construction and large - scale structure field:

33MnCrB5-2 hot-rolled alloy steel plates can be used to manufacture structural parts of large - scale structures such as ships and bridges, providing necessary strength and stability for these large - scale structures.

Energy and power field

33MnCrB5-2 boron-alloyed steels can be used to make header of super heater in power station boilers, etc., and can also be used in power generation equipment, such as key parts of coal - fired, gas - fired and nuclear power generation equipment (similar to the use of other boilers and pressure vessels).

For example, after wind turbine gearbox components adopt this steel, the trouble-free operation time is increased to 25,000 hours, and the service life of drill pipe joints of oil and gas drilling equipment is extended by about 40% under the working condition of 150 MPa pressure and frequent make-and-break operations.

EN10083-3 33MnCrB5-2 High Alloy Steel Plate,EN10083-3 33MnCrB5-2 High Alloy Steel Plates, EN10083-3 33MnCrB5-2 High Alloy Steel Sheets, EN10083-3 33MnCrB5-2 High Alloy Steel Sheet .

UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.

Request A Quote

If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.