S355 J2+N is European standard low alloy, S is carbon steel structural steel, and the 355 behind it means that the yield strength at room temperature is not less than 355Mpa. J2 requires -20°C impact. As for the +N behind it, it means equivalent to normalizing rolling or normalizing, and it does not mean that normalizing is necessary. It is just a way to name the steel number in the standard.
EN 10025 S355J2+N Plates Chemical Composition :
| Grade
S355J2+N |
C % | Si % | Mn % | P % | S % | N % | Cu % |
| + 0,02 | 0.600 | 1.700 | 0.035 | 0.035 | … | 0.060 |
EN 10025 S355J2+N Plates Mechanical Physical properties:
| Grade | Thickness(mm) | Min Yield (Mpa) | Tensile(MPa) | Elongation(%) | Min Impact Energy | |
| S355J2+N | 8mm-100mm | 315Map-355Mpa | 450-630Mpa | 18-20% | -20 | 27J |
| 101mm-200mm | 285Mpa-295Mpa | 450-600Mpa | 18% | -20 | 27J | |
| 201mm-400mm | 275Mpa | 450-600Mpa | 17% | -20 | 27J | |






