ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M Introduction
ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M Material, A1011 SS Grade 36 Type 1 steel,A1011 SS Grade 36 Type 1 steel hardness, A1011 SS Grade 36 Type 1 plate weight, A1011 SS Grade 36 Type 1 plate size, A1011 SS Grade 36 Type 1 plate thickness, ASTM A1011/A1011M Germany DIN equivalent, ASTM A1011/A1011M steel manufacturer in China, ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M steel mechanical properties, ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M steel in Malaysia, ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M steel in Dubai
Application: Standard Specification for Steel Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability.
Heat treated: 1858°C - 1964°C.
ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M Chemical Element
ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M in addition to carbon, steel also contains a small amount of manganese (Mn), silicon (Si), sulfur (S), phosphorus (P), oxygen (O), nitrogen (N) and hydrogen (H). These elements are not intentionally added to improve the quality of steel, but are brought in by ore and smelting process, so they are called impurity elements. These impurities have a certain impact on the properties of steel. In order to ensure the quality of steel, the chemical composition of all kinds of steel is strictly stipulated in technical standards.
The main elements proportion is as below:
| Element | Min | Max | Similar |
|---|---|---|---|
| V | - | 0.0080 | - |
| Ti | - | 0.0250 | - |
| S | - | 0.0400 | - |
| P | - | 0.0350 | - |
| Ni | - | 0.2000 | - |
| Nb | - | 0.0080 | - |
| Mo | - | 0.0600 | - |
| Mn | - | 1.3500 | - |
| Cu | - | 0.2000 | - |
| Cr | - | 0.1500 | - |
| C | - | 0.2500 | - |
ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M Mechanical Properties
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 451 (≥) | 742 (≥) | 24 | 32 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M Physical Properties
Physical performance parameters of ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M are mainly indicated by thermal conductivity, specific thermal capacity, modulus of elasticity, coefficient of thermal expansion, electrical resistance value, density, poisson's ratio, etc. parameters of ASTM A1011 SS Grade 36 Type 1 ASTM A1011/A1011M.
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson's coefficient, ν |
|---|---|---|---|---|---|---|---|
| 33 | - | - | 0.44 | - | |||
| 695 | 383 | - | 21.3 | 231 | - | ||
| 873 | - | 23 | 44.2 | 423 | 343 |
