What is the difference between S235JR and Q355B?

Jul 25, 2025 Leave a message

What is the difference between S235JR and Q355B?

S235JR:Steel grade S235JR is a popular general construction and machine steel that is made in accordance with the EN 10025-2 standard. Classification: Non-alloy structural steel.

Standard: EN 10025-2 (European)

Mechanical Properties:

Yield Strength: The minimum yield strength (ReH) for S235JR is 235 MPa for material up to 16mm thick.

Tensile Strength: The tensile strength (Rm) typically ranges from 360 to 510 MPa.

Elongation: S235JR has a minimum elongation (A) of 26% for thicknesses up to 16mm, as per European standard EN 10025-2.

Impact Toughness: S235JR has a minimum Charpy V-notch impact energy of 27 Joules at 20°C.

 

Q355B:Q355 steel is a Chinese structural steel grade that is part of the GB/T 1591 standard. It is a high-strength low-alloy steel known for its excellent mechanical properties, making it suitable for various structural applications in construction and engineering.

Standard: GB/T 1591 (Chinese)

Mechanical Properties of Q355B:

Yield Strength: ≥ 355 MPa (minimum for hot-rolled material)

Tensile Strength: 470 - 630 MPa

Elongation: ≥ 21% (typical for hot-rolled material)

Reduction of Area: ≥ 50% (typical for hot-rolled material)

Modulus of Elasticity: 200 GPa

Bulk Modulus: 140 GPa

Poisson's Ratio: 0.26

Shear Modulus: 79.3 GPa

Q355

What is equivalent to Q355 material?
A572 Grade 50
Q355 can be replaced with equivalent materials, including A572 Grade 50 USA ASTM, Q355 China GB/T, and SPFC 590 Vietnam/Japanese JIS.

 

What is S235JR equivalent to ASME material?

EN 10025 S235JR ASTM equivalent steel grades are ASTM A36, ASTM A283 Grade C/A283 Gr. C/ A283C. Of course, ASME SA36, ASME SA283 Grade C/SA283 Gr. C/ SA283C steel are equivalent to EN 10025 S235JR grade, too.

 

What is the Chinese equivalent of S235JR steel?

Q235B

The closest Chinese equivalent to S235JR (EN 10025-2) is Q235B (GB/T 700-2006). While these grades share similar mechanical properties, subtle differences in composition and performance must be carefully evaluated for compliance and safety.