S690QL VS E690:Euro Standard Quenched & Tempered Steel vs. Chinese Standard Marine Steel

S690QL and E690 are essentially the same high-strength steel, but they are identified by different standards: S690QL refers to the European standard (EN 10025-6), while E690 is the equivalent grade according to the international ISO 4952 standard. Both indicate a structural steel with a minimum yield strength of 690 MPa, produced using the "quenched and tempered" (Q+T) process.

S690QL Steel Plate is a super strength structural steel grade. S690QL Steel Plate is designed with a superior chemical composition allowing these modules to have good tolerances against different corrosive media. The En 10025 6 S690ql structural steel grade shows enhanced protection against wear and tear across stress-induced environments. S690ql Steel Plate is quenched and tempered to give its extraordinary strength in different structural steel applications.

En 10025 6 S690ql Specification

Strenx S690ql Plate Price

S690ql Steel Plate Also Known as

High Strength Structural Steel Plate,

High Yield Quenched and Tempered Steel Plate

HSLA

High Strength Quenched and Tempered Steel Plate

High Strength Low Alloy Steel Plate

High Yield Structural Steel Plate

S690ql Mechanical Properties

EN 10025-6 Grade S690QL Composition

Quenched and tempered S690QL equivalent material:

S690ql Steel Hardness

The high-strength S690ql steel grade is designed with a Brinell hardness rating of 414HBW.

What is S690ql Plate Thickness?

S690ql is a quenched and tempered high-strength grade. The EN 10025-6 S690QL High Yield Steel Plates are designed in thickness between 6mm up to 250mm.

S690QL Steel Plate Supplier , Dealer of EN 10025 S690QL Plate with width of 1250mm to 2500mm and thickness of 3mm to 300mm or as per need, view Properties & S690QL 700 vs E690

Request A Quote

NV 690 steel which belongs to the high strength low alloy (HSLA) steel has been utilized as the structural components in marine engineering, including pipelines, ocean platforms, naval ships, etc.

NV E690 shipbuilding steel plate is an extra higher strength shipbuilding plate which is mainly used for built hull of vessels,ship body construction and oil offshaore platform.Normally when rolling,quenched and tempered would improve steel strength in yield and tensile points.Generally before using these ship plates DNV Grade E690,steel plate pretreatment is necessary.Pre-treatment including shot blasting and painting with shop primer.

Mechnical property for DNV Grade E690 shipbuilding structual steel:

Chemical composition for DNV Grade E690 ship steel (Heat Analysis Max%)

Worldwide equivalents of grade E690 (Inter: ISO)

Request A Quote

Direct substitution is not recommended in principle: The two steels have different design purposes (S690QL focuses on extreme cold + heavy load, E690 focuses on marine + welding). Even with the same strength level, there are significant differences in core properties (corrosion resistance, low-temperature toughness, processability).

Adaptation in Special Cases:

For domestic heavy-load projects in non-marine environments requiring -40℃ low-temperature toughness, customized quenched and tempered E690 can be used as a substitute for S690QL;

For export marine projects to Europe, if the customer accepts EN standards, S690QL with additional marine anti-corrosion treatment can replace E690, but the cost will be higher.

Core Selection Principles

What is NV e690 material?

NV 690 steel which belongs to the high strength low alloy (HSLA) steel has been utilized as the structural components in marine engineering, including pipelines, ocean platforms, naval ships, etc.

What is the hardness of EN 10025 6 S690QL?

S690QL is a high strength quenched and tempered steel grade that complies to steel specification EN 10025. The designation S690QL refers to a minimum yield strength of 690MPa. Standard:Hot-rolled product made from structural steel.

What is EN 10025 S235JR ASTM equivalent steel grades?

EN 10025 S235JR ASTM equivalent steel grades are ASTM A36, ASTM A283 Grade C.

What is EN10225?

The European standard EN 10225 is one of the most important standards for steels which are used for the construction of offshore structures.

What is EN 10025 material?

EN 10025 S275 plate is made up of a material composition with 0.25% carbon, silicon and 1.6% manganese, sulfur and phosphorus. There is also the grade S355 for higher yield strength than the lower grade.

What is the material equivalent to s690?

The S690ql Equivalent Material in Japan is JIS JFE HITEN 780LE with ISO standard of ISO 4952 E690 grade. In Austria, the equivalent material is ALFORM 700. S690ql Equivalent Indian Standard is the Rockstar steel grade.S690ql Equivalent GB Standard is Q690D.

What is EN 10025 6 equivalent material?

Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Request A Quote

In addition to S690Q Steel Plate,GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to alloy@gneesteelgroup.com. You are welcome to consult us, and we are very willing to answer your questions.