S235J0W Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project.
Other Name
EN10025-5 S235J0W Boiler steel plate,EN10025-5 S235J0W Pressure Vessel Steel plate, EN10025-5 S235J0W Storage Tanks Steel plate. EN10025-5 S235J0W Heat Exchanger Steel Plate .
Additional Condition
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
Chemical composition % of the Product analysis of grade S235J0W
|
C |
Si |
Mn |
Cu |
P |
S |
Cr |
N |
|
0.16 |
0.45 |
0.15-0.70 |
0.20-0.60 |
0.040 |
0.040 |
0.35-0.85 |
0.010 |
Mechanical properties of grade S235J0W
|
Temperature |
-20 |
-10 |
0 |
20 |
|
Notch impact test. Min. absorbed energy J |
27 |
|
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 150 |
|
ReH - Minimum yield strength (MPa) |
235 |
225 |
215 |
215 |
215 |
195 |
|
Nominal thickness (mm) |
to 3 |
3 - 100 |
100-150 |
|
Rm -Tensile strength (MPa) |
360-510 |
360-510 |
350-500 |
|
Nominal thickness (mm) |
≥1.5<2 |
≥2﹤2.5 |
≥2.5<3 |
≥3<40 |
≥40﹤63 |
≥6﹤100 |
≥100﹤150 |
|
A - Minimum elongation Lo = 5,65 √ So (%) Longitudinal |
19 |
20 |
21 |
26 |
25 |
24 |
22 |






