Knowledge

S355K2+N belongs to the European standard low alloy steel plate.

S460NL is a normalized fine grain structural steel plate specified in EN 10025-3, with a minimum yield strength of 460 MPa and impact toughness verifi

A633GrC is a normalized high strength low alloy structural steel plate covered by ASTM A633/A633M, with a minimum yield strength of 345 MPa. The grade

SCM435 is a chromium molybdenum alloy structural steel specified in JIS G4053 with a nominal carbon content of about 0.35 %. After quenching and tempe

20CrMnTi is carburized steel, which is usually low carbon steel with a carbon content of 0.17%-0.24%. It is often used to make transmission gears in a

N06054 is a nickel based alloy with a chromium and molybdenum balance that gives excellent resistance to both oxidising and reducing corrosive media.

Q355NH has good welding performance and can be connected and assembled by conventional welding methods without special welding process.

Q460NH has good resistance to atmospheric corrosion, able to resist the erosion of acid rain, salty fog and other atmospheric pollutants, and is suita

Q460NH is a high strength weathering structural steel plate specified in GB/T 4171 for weather resistant structural steels, with a minimum yield stren

09CrCuSb is a low alloy steel plate whose chromium, copper and antimony additions give it strong resistance to sulphuric acid dew point corrosion. It

05CuPCrNi is a copper, phosphorus, chromium and nickel bearing weathering steel whose alloy content changes how the plate is cut, machined and welded.

15CrMoR is a chromium molybdenum steel plate for pressure vessels defined in the GB/T 713 pressure vessel steel standard, with a nominal carbon conten