P460NH is a European standard steel plate for pressure vessels. "460" indicates its yield strength in MPa, and "N" denotes that the steel plate is delivered in normalized or normalizing rolled condition.
Chemical Requirements
(cast analysis, % by mass, maximum permitted unless indicated otherwise)
| C | Si | Mn | P | S | Al total | N | Cr | Cu | Mo | Nb | Ni | Ti | V | Nb+Ti+V |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.20 | 0.60 | 1.10 – 1.70 | 0.025 | 0.015 | 0.020 min | 0.025 | 0.30 | 0.70 | 0.10 | 0.05 | 0.80 | 0.03 | 0.20 | 0.22 |
Tensile Requirements
| Product thickness | Yield strength MPA | Tensile strength MPA | Elongation A% |
|---|---|---|---|
| up to 16mm | 460 min | 570 – 730 | 17 min |
| 16mm to 40mm | 445 min | 570 – 720 | 17 min |
| over 40mm to 60mm | 430 min | 570 to 720 | 17 min |
| over 60mm to 100mm | 400 min | 540 to 710 | 17 min |
Impact energy values for the normalised condition
| -20°C | 0°C | +20°C | |
|---|---|---|---|
| Transverse | 30 J min | 40 J min | 50 J min |
| Lonitudinal | 45 J min | 65 J min | 75 J min |
Min. values for proof strength Rp0,2 (MPa) at elevated temperatures
| Thickness | 50°C | 100°C | 150°C | 200°C | 250°C | 300°C | 350°C | 400°C |
|---|---|---|---|---|---|---|---|---|
| up to 16mm | 445 | 419 | 388 | 356 | 326 | 300 | 278 | 261 |
| 16mm to 40mm | 430 | 405 | 375 | 345 | 316 | 290 | 269 | 253 |
| over 40mm to 60mm | 416 | 391 | 362 | 333 | 305 | 281 | 260 | 244 |
| over 60mm to 100mm | 387 | 364 | 337 | 310 | 284 | 261 | 242 | 227 |

Commonly Stocked Dimensions and Specifications
P460NH 10*2000-2400*9000-12000
P460NH 12*2200-2500*10000-13500
P460NH 15*2000-2500*9000-11500
P460NH 18*1800-2800*9000-12500
P460NH 20*2000-2400*9000-12000
P460NH 22*2300-2500*10000-13000
P460NH 25*2000-2500*9000-11500
P460NH 30*2000-2400*9000-12000
P460NH 35*1840-2600*9000-11500
P460NH 40*2000-2700*9500-12000
P460NH 50*2000-2700*9000-11500
P460NH 60*1850-2800*8700-12000





