A662GrA/A662 Grade A Low-Temperature Pressure Vessel Steel Plate

Aug 26, 2025 Leave a message

ASTM-A662-A662M.pdf

This article presents a comprehensive overview of the A662GrA/A662 Grade A low-temperature pressure vessel steel plate, highlighting its exceptional chemical composition, mechanical properties, heat treatment status, available production dimensions, low-temperature impact testing, primary applications, and supply cases by GNEE.

 

 

Products Description

 

info-587-254

SA662 Grade A steel plate, as a carbon-manganese-silicon steel plate specially designed for medium and low temperature pressure vessels, is particularly suitable for welded pressure vessels that require excellent low-temperature notch toughness. This type of steel plate complies with the specifications for American standard (ASME/ASTM) pressure vessel steel plates and serves as a crucial material in the manufacturing of American standard pressure vessels.

 

Chemical Composition

 

 

A662GrA/A662 Grade A hot-rolled plate is a carbon-manganese-silicon steel specifically designed for use in low-temperature pressure vessels. Its precise chemical composition ensures optimal performance in demanding environments. The primary elements and their specified ranges are:

 

info-187-186- Carbon (C): ≤ 0.20% (or ≤ 0.14% as per different sources)

- Silicon (Si): 0.15% - 0.50% (or 0.15% - 0.40%)

- Manganese (Mn): 1.00% - 1.60% (or 0.90% - 1.35%)

- Phosphorus (P): ≤ 0.035% (or ≤ 0.025%)

- Sulfur (S): ≤ 0.040% (or ≤ 0.025%)

- Aluminum (Als): ≥ 0.020%

This blend of elements contributes to the steel's high strength, toughness, fatigue resistance, impact resistance, and wear resistance.

 

 

Mechanical Properties

 

 

The mechanical properties of A662GrA/A662 Grade A pressure vessel plate are equally impressive, ensuring reliability in low-temperature applications.

info-198-196Key mechanical properties include:

- Tensile Strength: 400-540 MPa (or 58-78 ksi)

- Yield Strength: 275 MPa (or approximately 622 MPa as mentioned in another source, which might refer to the minimum yield strength value for the entire SA662 series)

- Elongation (%): ≥ 20% at 200mm gauge length; ≥ 23% at 50mm gauge length

These properties, combined with the steel's low-temperature impact toughness, make it an ideal choice for critical applications.

 

 

Heat Treatment Status

 

 

A662GrA/A662 Grade A hot-rolled plates undergo specific heat treatments to enhance their performance. All A-grade plates and B/C-grade plates thicker than 40mm are normalized. Plates up to 40mm in thickness are typically supplied in the as-rolled condition but can also be normalized, stress-relieved, or normalized with stress relief.

 

 

Available Production Dimensions

 

 

GNEE offers A662GrA/A662 Grade A steel plates in a wide range of sizes to meet various application requirements. Typical dimensions include:

- Thickness: 8mm - 250mm

- Width: 1600mm - 3000mm

- Length: 6000mm - 14000mm

Custom sizes are also available upon request.

 

 

Low-Temperature Impact Testing

 

 

A662GrA pressure vessel plate is specifically designed for low-temperature applications, with an impact temperature of 40°C. This ensures that the steel maintains its structural integrity and mechanical properties even in cold environments.

 

 

Primary Applications

 

 

A662GrA/A662 Grade A steel plate is widely used in industries requiring high-performance, low-temperature pressure vessels. Key applications include:

info-420-367

- Reactors

- Heat exchangers

- Separators

- Spherical tanks

- Oil and gas storage tanks

- Nuclear reactor pressure vessels

- Boiler drums

- Liquefied petroleum gas (LPG) cylinders

- High-pressure water pipes for hydropower stations

- Turbine casings

 

GNEE Supply Cases

 

 

GNEE, a reputable supplier of high-quality steel products, has successfully delivered A662GrA/A662 Grade A steel plates to numerous projects worldwide. These include:

- Oil & Gas Sector: Supplying steel plates for construction of cryogenic storage tanks in LNG terminals.

- Chemical Industry: Manufacturing reactor vessels for the production of chemicals requiring low-temperature processing.

- Power Generation: Fabricating boiler drums and pressure vessels for coal-fired and nuclear power plants.

Each supply case is tailored to meet the specific requirements of the client, ensuring compliance with international standards and regulations.

Click to get a free sample

 

In addition to container plates like A387/SA387, we also offer a variety of steel plate types, as shown in the table below, that are suited for different scenarios – including high-strength low-alloy plates for petrochemical high-pressure conditions, wear-resistant plates for mining heavy-duty wear, weather-resistant plates for outdoor harsh environments, and marine plates that meet shipbuilding standards. If you are looking for steel plates for specific applications, feel free to contact us anytime.

Email: alloy@gneesteelgroup.com

 

Other steel plate
Name Material Specification (mm) Tons Remark
Low Alloy Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo 6 - 350 5788.56 Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection
Pressure Vessel Plate Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) 3 - 300 8650 Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection
High-Strength Plate WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E 8 - 120 3086.352 Quenched and tempered
Wear-Resistant Plate NM360, NM400, NM450, NM500 6 - 150 3866.297 Quenched and tempered
Bridge Plate Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 8 - 200 2853.621 Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness