Introduction of Q345HD steel plate

Aug 26, 2025 Leave a message

Q345HD belongs to the category of nuclear power steel in carbon steel plate, where "Q" represents the yield of steel plate, "345" represents its yield degree, which is the smaller yield strength value in production regulations, and "HD" is composed of the earlier capital letters at the beginning of the word "nuclear power". Q345HD has two grades: Q345HD1 and Q345HD2.

Q345HD steel plate smelting composition analysis:
C: ≤0.24, Si: 0.15-0.4, Mn: 1.15-1.5, P: ≤0.015, S: ≤0.012, Ni: 0.4-0.7, Cr: ≤0.25, Mo: 0.45-0.6, Cu: ≤0.1, Nb: ≤0.02, V: ≤0.05, Ti: ≤0.03, Alt: 0.02-0.04, B: ≤0.001, Co: ≤0.04

Q345HD nuclear steel plate mechanical properties (6-38mm):
Rp0.2(MPa):≥345
Rm(MPa):550-690
A(%):≥18

Executive standard of Q345HD steel plate: GB/T 30814-2014; Other materials: Q205HD, Q230HD, Q250HD, Q275HD, Q345HD1, Q345HD2, Q420HD.

Q345HD is heat treated in the state of hot rolling, hot rolling plus tempering, normalizing, normalizing plus tempering.

Main properties of Q345HD steel plate: nuclear power steel shall have good structural stability, weldability, cold and hot workability, and nuclear fatigue strength under working temperature, and shall have good resistance to irradiation embrittlement under reactor irradiation.

 

wechat2025-07-16094237523

4. Q345HD Steel Plate Delivery Condition
The steel plate is delivered in quenched + tempered or quenched and tempered condition. The delivery condition can also be specified according to technical requirements.

5. Q345HD Steel Plate Through-Thickness Performance Requirements
Z15, Z25, Z35.

6. Q345HD Steel Plate Ultrasonic Testing Requirements
UT Class 1, UT Class 2, UT Class 3.

7. Q345HD Steel Plate Density
7.85 g/cm³.

8. Q345HD Steel Plate Theoretical Weight Formula
Thickness * Width * Length * Density.

9. Q345HD Steel Plate Conventional Dimensions
8mm–150mm *1600mm–2500mm *3000–12000mm

 

wechat2025-07-16094137182

Q345HD Steel Plate Production and Cutting Process Flow

Production Process:
Primary smelting → LF refining → VD treatment → Continuous casting (ingot casting) → Cleaning, heating → Rolling → (Stacking) → Surface inspection → Batching → Ultrasonic testing → Heat treatment → Cutting and sampling → Performance testing → Storage.

Cutting Process:
After the performance indicators of the Q345HD steel plate meet the requirements in the factory inspection, cutting processing is carried out according to the cutting technology. It can be cut and processed based on drawings. Generally, when the steel plate thickness is ≤20 mm, CNC plasma cutting or CNC laser cutting is preferred. If the steel plate thickness is >30 mm, CNC flame cutting is typically selected to control cutting precision and time.

Q345HD Custom Order Process Introduction

Specific dimensions, specifications, and quantity.

Minimum batch order of 60 tons.

The mill confirms the delivery cycle and unit price.

Communication and alignment with the supplier.

Signing a contract upon agreement on the cycle and price.

The mill issues a metallurgical code.

Awaiting delivery.