Name: China Stainless Steel Universal Beam Manufacturers Suppliers Factory - Customized Service - Gnee Steel
Brand: GNEE
SKU: 226557314

Description

Technical Parameters

Stainless Steel Universal Beam

Stainless steel is one of the materials of H steel, stainless steel profiles based on stainless steel has good corrosion resistance, but also set mechanical strength and high extensibility in one, easy to process and manufacture structural components, so that the engineering design can be maintained permanently integrity, can meet the needs of architects and structural designers, mainly suitable for Marine environment and chemical industry and other scenes.

stainless steel h section Products Description

Product Name	stainless steel H-beam
Model	A36, A992, Q235B, Q345.etc.
Shape	H-beam, I-beam, etc.
Technology	Hot Rolled, Cold Rolled, Cold Drawn, Forged or as requirement
Steel Grade	200 series: 201, 202, 202Cu, 204Cu, etc. 300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 316, 321/H, 347/H, etc. 400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446, etc. 600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630, 631), 660A/B/C/D, etc. Duplex: 2205(UNS S31803/S32205), 2507(UNS S32750), UNSS32760, etc. or as customer requirement
Surface	Bright, Polishe
Application	chanical & Manufacture, Steel strcuture, Shipbuilding, Bridging, Automobile Chassis, etc.

structural steel h beam Products Details

A steel beam is a beam made of steel. Steel beams are divided into: type steel beams, composite beams, the size of the beam steel section must be determined by calculation, and meet the strength, overall stability and stiffness of the three main requirements. Both I-beam and H-beam can be called steel beams. I-beam is a long strip of steel with a I-shape section, and the inner surface of the upper and lower flange is inclined. H-shaped steel is an economical and efficient type with more optimized section area distribution and more reasonable strength-to-weight ratio.

The two outer inner edges of H-shaped steel have no inclination and are flat and straight. This makes the welding splicing of H-beam steel simpler than that of I-beam steel, has better mechanical properties per unit weight, and can save a lot of materials and construction time. The section of I-steel is good for direct pressure and tensile resistance, but the section size can not be torsional resistance because the wing plate is too narrow. The H-shaped steel groove is deep, the thickness is large, and it can withstand the force in two directions, but the side length of the I-steel is small, the height is large, and it can only withstand the force in one direction. I-beams can only be used for beams, while H-beams can only be used for the load-bearing columns of the structure.