EN 10025-4 S460M steel plate has good weldability and fine grain structural properties. S460M steel plate can be used in steel structures or welded vessels or pressure vessels. At the same time, EN 10025-4 S460M steel plate can also be used at sea or any other application requiring high tensile strength.
EN10025-4 S460M steel plate is a technical delivery condition for thermo-mechanically rolled weldable fine-grained structural steel. EN10025-4 S460M steel plate, S means structural steel, 460 means maximum yield strength, M means delivery conditions.
EN S460M steel Chemical Composition:
| Grade | C max | Si max | Mn max | P max | S max | N max | AL max | Nb max | V max | Ti max | Cr max | Ni max | Mo max | Cu max | CEV max |
| S460M | 0.16 | 0.60 | 1.70 | 0.03 | 0.025 | 0.025 | 0.02 | 0.05 | 0.12 | 0.05 | 0.30 | 0.80 | 0.20 | 0.55 | 0.48 |
EN S460M steel Mechnical Properties:
| Temperature | -10 | 0 | 20 |
| Notch impact test. Min. absorbed energy | 43 | 47 | 55 |
| Nominal thickness(mm) | to 16 | 16-40 | 40-63 | 63-80 | 80-100 | 100-120 |
| ReH-Minimun yield strength(Mpa) | 460 | 440 | 430 | 410 | 400 | 385 |
| Nominal thickness(mm) | to 40 | 40-63 | 63-80 | 80-100 | 100-120 |
| Rm-Tensile strength(Mpa) | 540-720 | 530-710 | 510-690 | 500-680 | 490-660 |
| Nominal thickness(mm) | - | ||||
| A-Minimum elongation Lo=5,65√So(%) |
17 | ||||







