Type: Plate.
Material: ASTM A633 Grade E.
Wall Thickness: 12mm.
Width: 2000mm.
Length: 6000mm.
China ASTM A633 Grade E Plate Manufacturer GNEE Supplies ASTM A633 Grade E Plate, Wall Thickness 12mm, Width 2000mm, Length 6000mm.
ASTM A633 Grade E/A633 Gr.E HSLA structural steel plates are usually applied under low temperature work environment where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.
ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has minimum yield strength of 60 ksi [415 MPa] and may be ordered with supplemental Charpy V-notch impact test requirements.
Applications
Typical applications for A633 Grade E include utility pole base plates, offshore platforms, construction equipment frames, electric shovel dipper handles and suspension components.
Available Dimensions
The following A633 Grade E plate sizes are available:
Hide/Show specific columns Edit
|
Product type |
Thickness |
Width |
Length |
|---|---|---|---|
|
Discrete Plate |
0.375 - 2.00 |
72 - 120 |
240 - 600 |
Thickness: Inquire for thicknesses <0.3751 in. and >2 in.
Width: Inquire for widths <72 in. and >120 in.
Length: Inquire for lengths <240 in.
Chemical composition % of the Product analysis of grade A633 Grade E
|
C |
Si |
Mn |
P |
S |
Al(min) |
N |
|
0.22 |
0.15-0.50 |
1.15-1.50 |
0.035 |
0.04 |
|
0.01-0.03 |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
|
|
|
|
|
|
0.04-0.11 |
Mechanical properties of grade A633 Grade E
|
Temperature |
-35 |
-20 |
0 |
25 |
|
Notch impact test. Min. absorbed energy J |
41 |
54 |
61 |
68 |
|
Nominal thickness (mm) |
to 65 |
65 - 100 |
100 - 150 |
|
ReH - Minimum yield strength (MPa) |
415 |
415 |
380 |
|
Nominal thickness (mm) |
To 65 |
65- 100 |
100-150 |
|
Rm -Tensile strength (MPa) |
550-690 |
550-690 |
515-655 |
|
Gauge Length (mm) |
200 |
50 |
|
A - Minimum elongation Lo = 5,65 √ So (%) Longitudinal |
18 |
23 |
A-633 Grades A, C, D, E
GNEE Steel stocks and supplies the ASTM A633 structural steel plate, which offers stronger notch toughness.
Overview:
Normalized high-strength structural steel grade ideal for welding, riveting or bolting.
Available in four grades: A, C, D and E.
Exhibits greater notch toughness in low ambient temperatures than compared to as-rolled materials of similar strength.
Charpy test requirements for specific zones and climates may be requested.
May be multiple-certified as API or ABS specifications on Mill Test Report, but guaranteed to be certified to meet ASTM A633 standards.
Chemical Requirements
*Elements represented in percentage
Where "-" appears in this table, there is no requirement
| Element | Grade A, % | Grade C, % | Grade D, % | Grade E, %A |
|---|---|---|---|---|
| Carbon, max | 0.18 | 0.20 | 0.20 | 0.22 |
| Manganese: | ||||
| 1½ in. [40 mm] and under in thickness | 1.00-1.35 | 1.15-1.50B | 0.70-1.35 | 1.15-1.50 |
| Over 1½ in. to 4 in. [40 to 100 mm], incl | 1.00-1.35 | 1.15-1.50B | 1.00-1.60 | 1.15-1.50 |
| Over 4 in. to 6 in. [100 to 150 mm], incl | C | C | C | 1.15-1.50 |
| Phosphorus, max | 0.030 | 0.030 | 0.030 | 0.030 |
| Sulfur, max | 0.030 | 0.030 | 0.030 | 0.030 |
| Silicon | 0.15-0.50 | 0.15-0.50 | 0.15-0.50 | 0.15-0.50 |
| Vanadium | – | – | – | 0.04-0.11 |
| Columbium | 0.05 max | 0.01-0.05 | – | D |
| Nitrogen, max | – | – | – | 0.03 |
| Copper, max | – | – | 0.35 | – |
| Nickel, max | – | – | 0.25 | – |
| Chromium, max | – | – | 0.25 | – |
| Molybdenum, max | – | – | 0.08 | – |
Tensile Requirements
| Grade A | Grades C and D | Grade E | |
|---|---|---|---|
| Yield point, min, ksi [MPa]: | |||
| 2.5 in. [65 mm] and under | 42 [290] | 50 [345] | 60 [415] |
| Over 2.5 in. to 4 in. [65 to 100 mm], incl | 42 [290] | 46 [315] | 60 [415] |
| Over 4 in. to 6 in. [100 to 150 mm], incl | B | B | 55 [380] |
| Tensile strength, ksi [MPa]: | |||
| 2.5 in. [65 mm] and under | 63 to 83 [430 to 570] | 70 to 90 [485 to 620] | 80 to 100 [550 to 690] |
| Over 2.5 in. to 4 in. [65 to 100 mm], incl | 63 to 83 [430 to 570] | 65 to 85 [450 to 590] | 80 to 100 [550 to 690] |
| Over 4 in. to 6 in. [100 to 150 mm], incl | B | B | 75 to 95 [515 to 655] |
| Elongation in 8 in. [200 mm], min, %C | 18 | 18 | 18 |
| Elongation in 2 in. [50 mm], min, %C | 23 | 23 | 23 |
ASTM A633/A633M-18:Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level. The material shall have fine austenitic grain size and shall be normalized by heat treatment. Its chemical composition shall be determined by heat analysis. Tension tests shall also be done.
a633 steel equivalent:
ASTM A633 steel has equivalents such as S355JR or S355NL in European EN standards and SM490A or SS490 in Japanese JIS standards, with the specific equivalent grade (A, C, D, or E) of ASTM A633 influencing the exact international designation. For example, ASTM A633 Grade E is sometimes equated to EStE380 in Germany, while ASTM A633 Grade C and D are comparable to S355NL.
ASTM A633 Grades & Equivalents
ASTM A633 is a specification for normalized high-strength, low-alloy structural steel plates, and its equivalency depends on the specific grade:
ASTM A633 Grade Ais equivalent to EN S275NL.
ASTM A633 Grade Cand D are both equivalent to EN S355NL.
ASTM A633 Grade Eis equivalent to EN S355NL and the German standard EStE380.
Why Different Equivalents Exist
Different international standards have unique specifications and may have slightly different mechanical properties even if they are considered equivalent in general use.
