Oil and offshore platform steel plate S420G1+M owned the minimum yield strength at 420Mpa,and the tensile strength shall be above 500 Mpa.TMCP heat treatment is necessary for steel plate S420G1+M for any thickness when rolling.
Steel Standard:EN 10225
Rolling Type:Oil and offshore platform steel plate
Thickness:6mm-300mm
Width:1500mm-4200mm
Length:3000mm-18000mm
Heat Treatment:Thermo-Mechanical Control Process (TMCP)
Mechnical property for S420G1+M steel plate:
| Thickness (mm) | |||||
| S420G1+M | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 |
| Yield strength (≥Mpa) | 420 | 400 | 390 | 380 | 380 |
| ≤ 40 | > 40 | ||||
| Tensile strength (Mpa) | 500 | 480 | |||
Chemical composition for S420G1+M steel plate (Ladle Analysis Max%)
| Main chemical elements composition of S420G1+M steel plate | ||||||||
| C | Si | Mn | P | S | Cr | Mo | Nb+V | Nb+V+Ti |
| 0.14 | 0.15-0.55 | 1.65 | 0.020 | 0.010 | 0.25 | 0.25 | 0.09 | 0.11 |
| Ni | Alt | Cu | N | Nb | Ti | V | Cr+Mo+Ni+Cu | |
| 0.70 | 0.015-0.055 | 0.30 | 0.010 | 0.040 | 0.025 | 0.080 | 0.90 | |
S420G1+M Offshore Platform Steel Plate Other Name
S420G1+M Offshore platform Steel plate ,
S420G1+M Offshore Structural Steel Plate,
S420G1+M drilling platform Steel plate ,
S420G1+M Welding Structural Steel Plate .
Additional Condition
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.






