What Is P460NL1 Steel Plate
P460NL1 is a normalized fine-grain pressure vessel steel specified in EN 10028-3. The P designation indicates pressure vessel steel, 460 is the minimum yield strength in MPa, N indicates normalized delivery, and L1 indicates impact testing at minus 40 degrees C. Hot rolling destroys the casting structure of the ingot, eliminates microstructural defects, and refines the grains, improving the mechanical properties of the plate.
Chemical Composition
Composition limits are carbon 0.20 percent, silicon 0.60 percent, manganese 1.10 to 1.70 percent, phosphorus 0.025 percent, sulfur 0.015 percent, aluminum 0.020 percent minimum, nitrogen 0.025 percent, chromium 0.30 percent, copper 0.70 percent, molybdenum 0.10 percent, niobium 0.05 percent, nickel 0.80 percent, titanium 0.03 percent, and vanadium 0.20 percent, with a combined niobium, titanium, and vanadium limit of 0.22 percent.
Mechanical Properties
The yield strength is 460 MPa minimum up to 16 mm, 445 MPa for 16 to 40 mm, 430 MPa for 40 to 60 mm, and 400 MPa for 60 to 100 mm. Tensile strength ranges from 540 to 730 MPa depending on thickness, with elongation of 17 percent minimum. Impact toughness requires 27 J transverse and 30 J longitudinal minimum at minus 40 degrees C, with higher values at warmer temperatures.
Corrosion Behavior
P460NL1 forms a protective rust layer through oxidation caused by atmospheric pollutants, and this layer regenerates over time, providing corrosion resistance that is said to be inexpensive and highly effective for outdoor service.
Applications
P460NL1 is widely used in the fabrication of boilers and pressure vessels in manufacturing, petrochemical, and shipbuilding industries; heat exchangers in the oil sector, storage tanks, gas projects, power plants; and pressure vessels and pipes transporting hot liquids. The 460 MPa yield strength significantly reduces the weight of components through a high strength-to-weight ratio, with a flawless surface and good ductility.
Frequently Asked Questions
Q: What does P460NL1 mean?
A: Pressure vessel steel with 460 MPa minimum yield, normalized delivery, and impact testing at minus 40 degrees C per EN 10028-3.
Q: What is the yield strength of P460NL1?
A: 460 MPa minimum up to 16 mm, decreasing to 400 MPa for 60 to 100 mm.
Q: What impact energy is required?
A: 27 J transverse and 30 J longitudinal at minus 40 degrees C.
Q: What is the composition limit for sulfur?
A: 0.015 percent maximum for improved weldability and toughness.
Q: Where is P460NL1 used?
A: Boilers, pressure vessels, heat exchangers, storage tanks, and hot-liquid piping.
Q: What thickness range is available?
A: 8 to 100 mm with widths of 1500 to 3500 mm and lengths to 18000 mm.
For P460NL1 and EN 10028-3 plate quotations, contact our sales team.




