GB/T24186 NM500 wear-resistant steel plate is a wear-resistant steel plate with a hardness of 500HBW. Intended for use where wear resistance and good cold bending properties are required. GB/T24186 NM500 wear-resistant steel plate provides very old steel plates.
GB/T24186 NM500 wear-resistant steel plate is a high-strength wear-resistant steel plate with high wear resistance. Brinell hardness value up to 500 (HBW) is mainly used to provide protection against wear situations or parts to extend the service life of equipment, reduce maintenance and maintenance caused by maintenance, and correspondingly reduce capital investment.
GB/T24186 NM500 abrasion resistant steel plate chemical composition:
| Brand | C | Si | Mn | P | S | Cr | Mo | Ni | B | CEV |
| NM500 | ≤0.38 | ≤0.70 | ≤1.70 | ≤0.020 | ≤0.010 | ≤1.20 | ≤0.65 | ≤1.0 | Bt: 0.005-0.06 | 0.65 |
GB/T24186 NM500 abrasion resistant steel plate mechanical properties:
| Brand | Thickness mm | Tensile Test MPa | Hardness | |||||||
| YS Rel MPa | TS Rm MPa | Elongation % |
|
|||||||
| NM500 | 10-50 | --- | ---- | ≥24 | 480-525 | |||||






