NM400 steel plate properties

Feb 28, 2024 Leave a message

NM400 is a high-strength wear-resistant steel plate.NM400 has quite high mechanical strength; its mechanical properties are three to five times higher than those of ordinary low-alloy steel plates; it can significantly improve the wear resistance of machinery-related parts; therefore, it improves the service life of machinery; and it reduces the production cost. The surface hardness of the product usually reaches 360 to 450HB.


NM400 adopts electric furnace steelmaking, made from scrap iron steelmaking, steel quality is pure, steel plate is poured with steel, cooled and pressed into a flat steel. It is flat, rectangular, and can be rolled directly or sheared from wide steel strip. Steel plate by thickness, thin steel plate <8 mm (the thinnest 0.2 mm), medium-thick steel plate 8 ~ 60 mm, extra-thick steel plate 60 ~ 120 mm.


"NM": wear-resistant plate "wear-resistant" pinyin abbreviation hand letter;

"400": indicates the Brinell hardness value of steel plate HB value.

 

NM400 steel plate implementation standards: the implementation of GB/T24186-2009 standard.

 

NM400 steel plate delivery state: steel plate to normalised, tempered, quenched and other states of delivery, can also be specified according to technical requirements of the delivery state.

 

NM400 steel plate thickness direction performance requirements: Z15, Z25, Z35.

China abrasion plate Distributors

China abrasion resistant steel sheet Manufacturers

China abrasion resistant plate Suppliers