In industrial production, many equipment need to operate under harsh working conditions such as low temperature, high pressure, and corrosion, requiring extremely high comprehensive performance of steel plates.
Ordinary hot-rolled plates have insufficient low-temperature toughness and are prone to brittle fracture below -20℃; low-alloy plates have poor corrosion resistance and are prone to rust and failure in harsh medium environments; high-end alloy plates are expensive, significantly increasing project costs. In addition, some plates have poor processing performance, and cracks are likely to occur during welding and bending, affecting equipment manufacturing accuracy and production efficiency. These problems lead to high equipment maintenance costs, short service life, and even safety accidents, seriously affecting the normal production and economic benefits of enterprises.
Products Description
A203 Grade B hot-rolled alloy plate stands out in industrial applications with the core advantages of "multi-condition adaptability + high cost-effectiveness + easy processability". As a nickel alloy steel plate complying with ASTM standards, its nickel content is 3.25-3.75%, which endows it with excellent low-temperature toughness. It can still maintain good impact resistance at the extreme low temperature of -45℃, effectively preventing brittle fracture.
At the same time, the plate is produced by advanced hot-rolling technology, with a surface hardness of HB≥180, and its wear resistance is more than twice that of ordinary hot-rolled plates, capable of resisting material friction and impact. Its low sulfur and phosphorus composition design and nickel alloy content give it good corrosion resistance, which can withstand the erosion of groundwater, chemical media, etc.
In addition, A203 Grade B hot-rolled boiler plate has excellent processing performance, and can easily realize complex processing such as cutting, bending, and welding. The toughness loss in the weld heat-affected zone is small, which can meet the high-precision requirements of equipment manufacturing.
We also provide flexible OEM services, which can carry out customized production according to equipment needs, including specification cutting, heat treatment optimization, surface wear-resistant treatment, etc., fully adapting to the use needs of different industrial scenarios.
Technical Parameters
The technical parameters of A203 Grade B alloy plate fully cover the requirements of harsh industrial working conditions:
Chemical Composition
| Grade | The Element Max (%) | ||||||
|---|---|---|---|---|---|---|---|
| C | Si | Mn | P | S | Ni | N | |
| A203Gr.B | 0.21-0.25 | 0.13-0.45 | 0.78-0.88 | 0.035 | 0.035 | 2.03-2.57 |
Low-temperature performance: Minimum service temperature of -45℃, impact energy (Akv) ≥47J at -45℃, low-temperature toughness far exceeding that of ordinary hot-rolled plates and low-alloy plates.
Wear resistance: Brinell hardness HB≥180; in the wear test (load 50N, sliding speed 0.5m/s), the wear loss is only 40% of that of ordinary hot-rolled plates.
Corrosion resistance: Resistant to neutral salt spray for ≥720 hours, corrosion rate in sulfuric acid (5% concentration, normal temperature) ≤0.08mm/year, excellent resistance to groundwater corrosion.
Mechanical properties: Yield strength ≥345MPa, tensile strength 550-700MPa, elongation ≥22%, strong structural stability.
Mechanical Properties
| Grade | Thickness | Yield Strength (Min Mpa) | Tensile Strength (Mpa) | Elongation (Min %) | Charpy V Notch Impact Test | |
|---|---|---|---|---|---|---|
| (mm) | Degree (℃) | Min Value (J) | ||||
| A203Gr.B | 5≤t≤50 | 275 | 485-620 | 21% | -45 | ≥47 |
| 50≤t≤200 | 275 | 485-620 | 17% | -45 | ≥47 |
Processing performance: No cracks in cold bending test (bending radius = 3 times the plate thickness), welding joint strength ≥90% of the base metal strength, adaptable to complex equipment structures.
Specification range: Thickness 6-150mm, width 1500-4000mm, length 6000-18000mm, supporting fixed-length cutting and special-shaped processing.
Delivery conditions: Hot-rolled (HR), normalized (N), normalized + tempered (N+T), suitable delivery conditions can be selected according to working conditions.
Compared with ordinary hot-rolled plates, low-alloy plates, and high-end alloy plates, A203 Grade B has more advantages in comprehensive performance: its low-temperature toughness is better than that of ordinary hot-rolled plates and Q345R low-alloy plates, its wear and corrosion resistance is close to that of high-end alloy plates, its price is only 50-60% of that of high-end alloy plates, and its processing performance is far superior to similar products, which can meet the diverse needs of industrial applications to the greatest extent.
Customer Case
A mining enterprise selected our A203 Grade B hot-rolled nickel alloy steel plate for its low-temperature wear-resistant equipment renovation project. According to the working characteristics of the equipment, we provided OEM customization services, cutting the plates into special-shaped sizes required by the equipment, and performing surface wear-resistant treatment to enhance the wear resistance of the plates.
At the same time, our technical team provided welding process guidance for the enterprise to ensure the stable performance of the welding joints during equipment manufacturing. After the equipment was put into operation, it operated well, and the surface wear rate of the plates slowed down significantly. After 6 months, the wear loss was only 1/3 of that of the original ordinary hot-rolled plates, and there was no rust or brittle fracture. Up to now, the equipment has been operating stably for 18 months, without any plate-related maintenance. The maintenance cost has been reduced by 90%, saving the enterprise more than 800,000 yuan in maintenance costs and downtime losses annually.
In addition, the excellent processing performance of the plate has shortened the equipment manufacturing cycle by 20%, improving the enterprise's production efficiency. At present, the enterprise has listed our A203 Grade B hot-rolled boiler plate as the designated steel for its low-temperature wear-resistant equipment.
If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.
FAQ
Q: Can the wear resistance of A203 Grade B pressure vessel plates be further improved?
A: Yes. According to customer needs, we can perform surface strengthening treatment on the plates, such as thermal spraying, laser cladding, etc. After treatment, the surface hardness of the plates can be increased to HB≥350, and the wear resistance is 2-3 times that of the original plates, suitable for working conditions with particularly serious wear. For details, you can consult our technical personnel for customization.
Q: Can this plate be used in high-temperature working conditions? What is the maximum temperature it can withstand?
A: The main advantage of A203 Grade B low temperature pressure vessel steel is its low-temperature performance, but its maximum temperature resistance can reach 450℃, which can be used in medium and low-temperature (≤450℃) working conditions. If the working temperature exceeds 450℃, it is recommended to choose a special high-temperature resistant alloy plate. We can provide corresponding product recommendations and technical solutions.
Q: How does the cost-effectiveness of A203 Grade B alloy plate compare with other hot-rolled alloy plates?
A: It has extremely high cost-effectiveness. Compared with similar low-temperature hot-rolled alloy plates, A203 Grade B is 15-20% lower in price, with better low-temperature toughness and corrosion resistance; compared with high-end nickel alloy hot-rolled plates, it is 40-50% lower in price, and its comprehensive performance is only slightly inferior, which can meet the needs of most industrial working conditions, making it the best balance between cost and performance.
Q: Can a traceability report of the plate be provided when purchasing?
A: Yes. Each batch of our A203 Grade B hot-rolled alloy plates has a unique production batch number, and a complete traceability report can be provided, including raw material procurement information, production process parameters, quality inspection records, outbound logistics information, etc., to ensure the traceability of plate quality and meet the enterprise's quality control requirements.
| Grades Of Pressure Vessel Plates Supplied By GNEE | |||||
| ASTM | ASTM A202/A202M | ASTM A202 Grade A | ASTM A202 Grade B | ||
| ASTM A203/A203M | ASTM A203 Grade A | ASTM A203 Grade B | ASTM A203 Grade D | ASTM A203 Grade E | |
| ASTM A203 Grade F | |||||
| ASTM A204/A204M | ASTM A204 Grade A | ASTM A204 Grade B | ASTM A204 Grade C | ||
| ASTM A285/A285M | ASTM A285 Grade A | ASTM A285 Grade B | ASTM A285 Grade C | ||
| ASTM A299/A299M | ASTM A299 Grade A | ASTM A299 Grade B | |||
| ASTM A302/A302M | ASTM A302 Grade A | ASTM A302 Grade B | ASTM A302 Grade C | ASTM A302 Grade D | |
| ASTM A387/A387M | ASTM A387 Grade 5 Class1 | ASTM A387 Grade 5 Class2 | ASTM A387 Grade 11 Class1 | ASTM A387 Grade 11 Class2 | |
| ASTM A387 Grade 12 Class1 | ASTM A387 Grade 12 Class2 | ASTM A387 Grade 22 Class1 | ASTM A387 Grade 22 Class2 | ||
| ASTM A515/A515M | ASTM A515 Grade 60 | ASTM A515 Grade 65 | ASTM A515 Grade 70 | ||
| ASTM A516/A516M | ASTM A516 Grade 55 | ASTM A516 Grade 60 | ASTM A516 Grade 65 | ASTM A516 Grade 70 | |
| ASTM A517/A517M | ASTM A517 Grade A | ASTM A517 Grade B | ASTM A517 Grade E | ASTM A517 Grade F | |
| ASTM A517 Grade P | ASTM A517 Grade J | ||||
| ASTM A533/A533M | ASTM A533 Grade A Class1 | ASTM A533 Grade B Class1 | ASTM A533 Grade C Class1 | ASTM A533 Grade D Class1 | |
| ASTM A533 Grade A Class2 | ASTM A533 Grade B Class2 | ASTM A533 Grade C Class2 | ASTM A533 Grade D Class2 | ||
| ASTM A533 Grade A Class3 | ASTM A533 Grade B Class3 | ASTM A533 Grade C Class3 | ASTM A533 Grade D Class3 | ||
| ASTM A537/A537M | ASTM A537 Class1 | ASTM A537 Class2 | ASTM A537 Class3 | ||
| ASTM A612/A612M | ASTM A612 | ||||
| ASTM A662/A662M | ASTM A662 Grade A | ASTM A662 Grade B | ASTM A662 Grade C | ||
| EN | EN10028-2 | EN10028-2 P235GH | EN10028-2 P265GH | EN10028-2 P295GH | EN10028-2 P355GH |
| EN10028-2 16MO3 | |||||
| EN10028-3 | EN10028-3 P275N | EN10028-3 P275NH | EN10028-3 P275NL1 | EN10028-3 P275NL2 | |
| EN10028-3 P355N | EN10028-3 P355NH | EN10028-3 P355NL1 | EN10028-3 P355NL2 | ||
| EN10028-3 P460N | EN10028-3 P460NH | EN10028-3 P460NL1 | EN10028-3 P460NL2 | ||
| EN10028-5 | EN10028-5 P355M | EN10028-5 P355ML1 | EN10028-5 P355ML2 | EN10028-5 P420M | |
| EN10028-5 P420ML1 | EN10028-5 P420ML2 | EN10028-5 P460M | EN10028-5 P460ML1 | ||
| EN10028-5 P460ML2 | |||||
| EN10028-6 | EN10028-6 P355Q | EN10028-6 P460Q | EN10028-6 P500Q | EN10028-6 P690Q | |
| EN10028-6 P355QH | EN10028-6 P460QH | EN10028-6 P500QH | EN10028-6 P690QH | ||
| EN10028-6 P355QL1 | EN10028-6 P460QL1 | EN10028-6 P500QL1 | EN10028-6 P690QL1 | ||
| EN10028-6 P355QL2 | EN10028-6 P460QL2 | EN10028-6 P500QL2 | EN10028-6 P690QL2 | ||
| JIS | JIS G3115 | JIS G3115 SPV235 | JIS G3115 SPV315 | JIS G3115 SPV355 | JIS G3115 SPV410 |
| JIS G3115 SPV450 | JIS G3115 SPV490 | ||||
| JIS G3103 | JIS G3103 SB410 | JIS G3103 SB450 | JIS G3103 SB480 | JIS G3103 SB450M | |
| JIS G3103 SB480M | |||||
| GB | GB713 | GB713 Q245R | GB713 Q345R | GB713 Q370R | GB713 12Cr1MoVR |
| GB713 12Cr2Mo1R | GB713 13MnNiMoR | GB713 14Cr1MoR | GB713 15CrMoR | ||
| GB713 18MnMoNbR | |||||
| GB3531 | GB3531 09MnNiDR | GB3531 15MnNiDR | GB3531 16MnDR | ||
| DIN | DIN 17155 | DIN 17155 HI | DIN 17155 HII | DIN 17155 10CrMo910 | DIN 17155 13CrMo44 |
| DIN 17155 15Mo3 | DIN 17155 17Mn4 | DIN 17155 19Mn6 | |||






