EN10025-6 S690Q /S690 Q STEEL PLATE/1.8931

High yield strength S690Q,S690Q steel plate,S690Q steel sheet which is most used in high strength mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, excavator, car loader.High strength steel plate S690Q shall be done heat treatment under quenching and tempering,and done low temperature impacting test at -20 centigrade.GNEE Steel can offer steel plate S690Q maximum thickness reach to 300mm currently.The maximum width shall be 4200mm,so welcome our customers inquiry Xinsteel for wide-heavy steel plate of S690Q.

S690Q steel is used in structures subject to extreme loads: mining and heavy-construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.

S690Q steel is suited to welding done without preheating or subsequent heat treatment. It is organically weldable as its behaviour during and after welding depends not only on the material, but also on the sizes and shapes as well as the product operation conditions. The requirements for arc-welding must conform to the EN 1011-2 standard

As the product gauge and strength increase, cold-cracking may occur, caused by the following:

Large quantities of diffusing hydrogen in the weld-seam metal;

Significant tension-stress concentrations at the weld seam.

Fragile structure of the heat-affected zone;

Request A Quote

GNEE Steel, based in China- a reliable manufacturer and supplier, is well known for providing top-notch steel solutions to various industries. With expertise in EN 10025-2 S690Q Sheets and Plates, the company provides high-grade products for superior performance in challenging applications. The high-strength steel plates are extensively used in construction, heavy machinery, and structural works because of their superior toughness, weldability, and durability. Dedicated to accuracy and customer satisfaction, GNEE Steel ensures every product meets high quality standards, making them a valued partner for international engineering requirements.

If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.

FAQ

What is the difference between S690Q and S690QL?

S690Q: Minimum impact toughness tested at -20°C (30J average). → Typical Use: Cranes in temperate climates, quarry equipment. S690QL: Certified for -40°C and below (≥40J impact toughness). → Critical Use: Arctic pipelines, offshore platforms, mining vehicles in Siberia.

What grade is S690QL material?

S690QL is a high strength quenched and tempered steel grade that complies to steel specification EN 10025. The designation S690QL refers to a minimum yield strength of 690 MPa.

What is S690 grade steel?

S690 high yield & fine grain steel plate is a high strength, quenched and tempered fine-grain structural steel. Structural steel S690 is used in structures that must withstand very heavy loads. This grade is meant for structures where weight savings is important.

What is the equivalent of S690 steel?

Approximate equivalents
ASTM A514, EN 10149-2 Grade S700MC, AS/NZS 3579 Grade 700, AM 700, Bisalloy 80.

What is the price of S690QL material?

S690QL High Strength Steel Plates, Thickness: 5mm to 150mm at ₹ 135/kilogram in Mumbai.

What is the hardness of S690 QL steel?

S690QL steel stockholders and suppliers. S690QL is a quenched and tempered high strength steel supplied in full plates or cut pieces with delivery to the whole of the UK. With its high yield of minimum 690MPa it offers better strength than standard carbon steel grades.

What is the effective use of high strength S690 steel in construction?

The high strength S690 steels have an excellent strength-to-self-weight ratio, and they are highly efficient to be used in heavily loaded structures. Typical applications include piles and columns in buildings and supporting members in bridges.

What is the difference between S890QL and S690QL?

S690QL, S890QL, and S960QL are all water quenched and tempered steels that comply with the EN10025:6:2004 specification. These ultra high strength steels have a minimum yield strength of 690 MPa, 890 MPa, and 960 Mpa respectively, making them ideal for use in the haulage sector.

What is the difference between S700MC and S690ql?

The S700MC Steel is basically a structural steel plate developed especially for applications requiring high yield strength. They are used for several load bearing applications. The S690ql is a low alloy structural steel which is high in strength and comes with good weldability.

What is the yield strength of s690 steel?

690 MPa.

Yield strength of 690 MPa. Used in structures bearing extremely heavy loads, such as bridges, offshore drilling rigs and buildings, as well as in heavy construction equipment and cranes.