What is Sa 285 Grade C Plate?
Sa 285 Gr C is a low carbon steel grade. A Sa 285 Grade C pressure vessel steel plate is designed with an excellent composition of chromium, nickel, and molybdenum, giving the versatile Astm SA285 GR.C grade superior corrosion and oxidation resistance properties. The grade also exhibits good resistance against pitting and crevice corrosion.
The Astm SA285 Grade C alloy steel plate is employed in high-pressure applications due to its superior tensile strength across stress-induced systems. SA285 Grade C Plate has good workability and can be welded following standard welding procedures. The items in the SA285 C GR.C are widely used in pressure vessels, boiler tubes, and so on.
A285 Grade C Vs A36
A36 grade is a structural steel grade. The SA285 GR.C Steel plate on the contrary is a high-strength carbon steel grade.
ASTM A285 Grade C Plate shows a small concentration of manganese which helps increase its hardenability. A36 steel doesn't possess any manganese content.
The SA-285 Steel Plates show the presence of chromium, nickel, and molybdenum in its concentration, giving it higher resistance against corrosive media than the A36 grade.
A36 grade has slightly higher tensile and yield strength over the ASTM A285 Grade C Carbon Steel Plate.
-
ASME SA285 Grade C hot rolled steel plate Chemical Composition
| Element Composition % | SA 285 Gr C |
|---|---|
| Manganese, maximum | 00.90 |
| Carbon, maximum | 00.28 |
| Phosphorus, maximum | 00.025 |
| Sulfur, maximum | 00.025 |
- ASTM A36 Chemical Composition
|
ASTM A36 Hot Rolled Steel Plate |
Chemical Compostion | |
|---|---|---|
| Element | content | |
| Carbon, C | 0.25 - 0.290 % | |
| Copper, Cu | 0.20 % | |
| Iron, Fe | 98.0 % | |
| Manganese, Mn | 1.03 % | |
| Phosphorous, P | 0.040 % | |
| Silicon, Si | 0.280 % | |
| Sulfur, S | 0.050 % | |
- SA 285 GR.C Plate Mechanical Properties
| Element | SA 285 Gr C ksi (MPa) |
|---|---|
| Yield strength, minimum | 30 ksi (205) |
| Elongation in 2 inch or (50mm), min, % | 27 |
| Tensile strength | 55 to 75 ksi(380-515) |
| Elongation in 8 inch or (200 mm), min, % | 23 |
- ASTM A36 Hot Rolled Steel Plate Mechanical Properties
| ASTM A36 Hot Rolled Steel Plate | ||
|---|---|---|
| Mechanical Properties | Metric | Imperial |
| Tensile Strength, Ultimate | 400 - 550 MPa | 58000 - 79800 psi |
| Tensile Strength, Yield | 250 MPa | 36300 psi |
| Elongation at Break (in 200 mm) | 20.0 % | 20.0 % |
| Elongation at Break (in 50 mm) | 23.0 % | 23.0 % |
| Modulus of Elasticity | 200 GPa | 29000 ksi |
| Bulk Modulus (typical for steel) | 140 GPa | 20300 ksi |
| Poissons Ratio | 0.260 | 0.260 |
| Shear Modulus | 79.3 GPa | 11500 ksi |
Properties of Astm sA285 Grade C hot rolled steel plate
Astm SA285 Gr C is a high-temperature pressure vessel grade. The SA285 Grade C hot rolled steel plates can be machined and welded following standard welding procedures. The versatile grade possesses excellent corrosion and oxidation resistance properties. The SA 285 Gr.C Boiler & Pressure Vessel Steel Plates are designed with an outstanding tensile strength between 380mpa to 515mpa.
The robust SA 285 GR.C Plate exhibits a minimum yield strength of 205mpa and can be easily elongated by 27% in the system. The ASME SA285 Grade C Boiler Quality Plate is rolled or normalized in thickness between 6mm, up to 150mm or more.
If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.
SA 285 Grade C Plate Dimensions
|
Width |
Thickness |
Length |
|
2000 |
4 |
6000 |
|
2500 |
6 |
6000 |
|
2000 |
8 |
6000 |
|
2000 |
6 |
6000 |
|
2000 |
5 |
6000 |
|
2500 |
8 |
6000 |
|
1800 |
60 |
3400 |
|
2000 |
10 |
6000 |
|
2000 |
15 |
6000 |
|
2000 |
20 |
6000 |
|
2000 |
16 |
6000 |
|
2000 |
12 |
6000 |
|
2000 |
25 |
6000 |
|
2000 |
40 |
6000 |
|
2000 |
32 |
6000 |
|
2000 |
50 |
6000 |
| Grades Of Pressure Vessel Plates Supplied By GNEE | |||||
| ASTM | ASTM A202/A202M | ASTM A202 Grade A | ASTM A202 Grade B | ||
| ASTM A203/A203M | ASTM A203 Grade A | ASTM A203 Grade B | ASTM A203 Grade D | ASTM A203 Grade E | |
| ASTM A203 Grade F | |||||
| ASTM A204/A204M | ASTM A204 Grade A | ASTM A204 Grade B | ASTM A204 Grade C | ||
| ASTM A285/A285M | ASTM A285 Grade A | ASTM A285 Grade B | ASTM A285 Grade C | ||
| ASTM A299/A299M | ASTM A299 Grade A | ASTM A299 Grade B | |||
| ASTM A302/A302M | ASTM A302 Grade A | ASTM A302 Grade B | ASTM A302 Grade C | ASTM A302 Grade D | |
| ASTM A387/A387M | ASTM A387 Grade 5 Class1 | ASTM A387 Grade 5 Class2 | ASTM A387 Grade 11 Class1 | ASTM A387 Grade 11 Class2 | |
| ASTM A387 Grade 12 Class1 | ASTM A387 Grade 12 Class2 | ASTM A387 Grade 22 Class1 | ASTM A387 Grade 22 Class2 | ||
| ASTM A515/A515M | ASTM A515 Grade 60 | ASTM A515 Grade 65 | ASTM A515 Grade 70 | ||
| ASTM A516/A516M | ASTM A516 Grade 55 | ASTM A516 Grade 60 | ASTM A516 Grade 65 | ASTM A516 Grade 70 | |
| ASTM A517/A517M | ASTM A517 Grade A | ASTM A517 Grade B | ASTM A517 Grade E | ASTM A517 Grade F | |
| ASTM A517 Grade P | ASTM A517 Grade J | ||||
| ASTM A533/A533M | ASTM A533 Grade A Class1 | ASTM A533 Grade B Class1 | ASTM A533 Grade C Class1 | ASTM A533 Grade D Class1 | |
| ASTM A533 Grade A Class2 | ASTM A533 Grade B Class2 | ASTM A533 Grade C Class2 | ASTM A533 Grade D Class2 | ||
| ASTM A533 Grade A Class3 | ASTM A533 Grade B Class3 | ASTM A533 Grade C Class3 | ASTM A533 Grade D Class3 | ||
| ASTM A537/A537M | ASTM A537 Class1 | ASTM A537 Class2 | ASTM A537 Class3 | ||
| ASTM A612/A612M | ASTM A612 | ||||
| ASTM A662/A662M | ASTM A662 Grade A | ASTM A662 Grade B | ASTM A662 Grade C | ||
| EN | EN10028-2 | EN10028-2 P235GH | EN10028-2 P265GH | EN10028-2 P295GH | EN10028-2 P355GH |
| EN10028-2 16MO3 | |||||
| EN10028-3 | EN10028-3 P275N | EN10028-3 P275NH | EN10028-3 P275NL1 | EN10028-3 P275NL2 | |
| EN10028-3 P355N | EN10028-3 P355NH | EN10028-3 P355NL1 | EN10028-3 P355NL2 | ||
| EN10028-3 P460N | EN10028-3 P460NH | EN10028-3 P460NL1 | EN10028-3 P460NL2 | ||
| EN10028-5 | EN10028-5 P355M | EN10028-5 P355ML1 | EN10028-5 P355ML2 | EN10028-5 P420M | |
| EN10028-5 P420ML1 | EN10028-5 P420ML2 | EN10028-5 P460M | EN10028-5 P460ML1 | ||
| EN10028-5 P460ML2 | |||||
| EN10028-6 | EN10028-6 P355Q | EN10028-6 P460Q | EN10028-6 P500Q | EN10028-6 P690Q | |
| EN10028-6 P355QH | EN10028-6 P460QH | EN10028-6 P500QH | EN10028-6 P690QH | ||
| EN10028-6 P355QL1 | EN10028-6 P460QL1 | EN10028-6 P500QL1 | EN10028-6 P690QL1 | ||
| EN10028-6 P355QL2 | EN10028-6 P460QL2 | EN10028-6 P500QL2 | EN10028-6 P690QL2 | ||
| JIS | JIS G3115 | JIS G3115 SPV235 | JIS G3115 SPV315 | JIS G3115 SPV355 | JIS G3115 SPV410 |
| JIS G3115 SPV450 | JIS G3115 SPV490 | ||||
| JIS G3103 | JIS G3103 SB410 | JIS G3103 SB450 | JIS G3103 SB480 | JIS G3103 SB450M | |
| JIS G3103 SB480M | |||||
| GB | GB713 | GB713 Q245R | GB713 Q345R | GB713 Q370R | GB713 12Cr1MoVR |
| GB713 12Cr2Mo1R | GB713 13MnNiMoR | GB713 14Cr1MoR | GB713 15CrMoR | ||
| GB713 18MnMoNbR | |||||
| GB3531 | GB3531 09MnNiDR | GB3531 15MnNiDR | GB3531 16MnDR | ||
| DIN | DIN 17155 | DIN 17155 HI | DIN 17155 HII | DIN 17155 10CrMo910 | DIN 17155 13CrMo44 |
| DIN 17155 15Mo3 | DIN 17155 17Mn4 | DIN 17155 19Mn6 | |||
