S460G1+M and S460G2+M are both high-strength structural steels (S460) for offshore use (G) under EN 10225, but the key difference lies in their heat treatment and specific properties, with S460G2+M generally offering tighter control and enhanced properties (like better toughness or specific processing) via Thermo-Mechanical Control Process (TMCP) for demanding applications, while S460G1+M also uses TMCP but might have slightly different composition or mechanical targets, making S460G2+M a more specific, often higher-performing grade within the S460 family.
Here's a breakdown of the standard notation:
S: Structural Steel.
460: Minimum Yield Strength in MPa (460 MPa).
G1 / G2: Indicates different steel grades within the S460 family for offshore use, with G2 often denoting enhanced requirements.
+M: Indicates the steel has been produced using the Thermo-Mechanical Control Process (TMCP) for controlled microstructure and improved properties, especially toughness.
Mechnical property for S460G1+M steel plate:
| Thickness (mm) | ||||||
| S460G1+M steel plate | ≤ 16 | > 16 ≤ 25 | > 25 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 |
| Yield strength (≥Mpa) | 460 | 440 | 420 | 415 | 405 | 400 |
| Tensile strength (Mpa) | 540-700 | 530-690 | 520-680 | 515-675 | 505-665 | 500-660 |
Mechnical property for S460G2+M steel plate:
| Thickness (mm) | ||||||
| S460G2+M | ≤ 16 | > 16 ≤ 25 | > 25 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 |
| Yield strength (≥Mpa) | 460 | 440 | 420 | 415 | 405 | 400 |
| Tensile strength (Mpa) | 540-700 | 530-690 | 520-680 | 515-675 | 505-665 | 500-660 |
Chemical composition for S460G1+M steel plate
| Main chemical elements composition of S460G1+M steel plate | ||||||||
| C | Si | Mn | P | S | Cr | Mo | Nb+V | Nb+V+Ti |
| 0.14 | 0.15-0.55 | 1.65 | 0.020 | 0.010 | 0.25 | 0.25 | 0.09 | 0.11 |
| Ni | Alt | Cu | N | Nb | Ti | V | Cr+Mo+Ni+Cu | |
| 0.70 | 0.015-0.055 | 0.30 | 0.010 | 0.040 | 0.025 | 0.080 | 0.90 | |
Chemical composition for S460G2+M steel plate
| Main chemical elements composition of S460G2+M steel plate | ||||||||
| C | Si | Mn | P | S | Cr | Mo | Nb+V | Nb+V+Ti |
| 0.14 | 0.15-0.55 | 1.65 | 0.020 | 0.010 | 0.25 | 0.25 | 0.09 | 0.11 |
| Ni | Alt | Cu | N | Nb | Ti | V | Cr+Mo+Ni+Cu | |
| 0.70 | 0.015-0.055 | 0.30 | 0.010 | 0.040 | 0.025 | 0.080 | 0.90 | |
Key Differences:
Refined Grade: S460G2+M is a more specific grade within the S460 range, often requiring stricter control over chemical composition (like lower Carbon Equivalent) and processing to ensure superior toughness, weldability, and performance in very harsh marine environments, compared to S460G1+M or other G1 grades.
Application: Both are for offshore, but G2 steels (like S460G2+M) are often specified for critical structural components requiring assured properties, even at large thicknesses, which TMCP helps achieve.
Properties: While both have 460 MPa yield strength, S460G2+M typically has tighter tensile strength ranges (e.g., 540-700 MPa) and enhanced toughness (impact energy) compared to G1 grades.



