Difference between A203 Grade A and A203 Grade B

Jan 12, 2026 Leave a message

ASTM A203 Grade A and Grade B are nickel-alloy steel plates for welded pressure vessels, differing mainly in their nickel content and mechanical properties, with Grade B offering higher minimum yield strength (around 275 MPa) compared to Grade A (around 255 MPa), making Grade B suitable for more demanding applications, both generally featuring about 2% nickel for low-temperature service, though specific chemistries and heat treatments vary slightly by manufacturer.

 

Mechnical property for A203 Grade B steel plate

 

Mechanical Property of A203 Grade A steel plate

A203 Grade A

Tensile strength, kis [MPa]

65-85 [450-585]

Yield strength, min, kis [MPa]

37 [255]

Elongation in 8 in. [200 mm], min, %

15

Elongation in 2 in. [50 mm], min, %

19

 

Mechnical property for A203 Grade B steel plate

 

Mechanical Property of A203 Grade B steel plate

A203 Grade B

Tensile strength, kis [MPa]

70-90[485-620]

Yield strength, min, kis [MPa]

40 [275]

Elongation in 8 in. [200 mm], min, %

17

Elongation in 2 in. [50 mm], min, %

21

 

Chemical composition for A203 Grade A steel plate

 

Grade

The Element Max (%)

C

Si

Mn

P

S

A203 Grade A

0.17

0.13-0.45

0.78-0.88

0.035

0.035

 

Chemical composition for A203 Grade B steel plate
 

Grade

The Element Max (%)

C

Si

Mn

P

S

A203 Grade B

0.17

0.13-0.45

0.78-0.88

0.035

0.035

 

Key Differences & Similarities

Material Type: Both are nickel-alloy steels (2% nickel steels) specified by ASTM for pressure vessels.

Application: Used in oil, gas, chemical, and power industries for reactors, heat exchangers, and storage tanks.

Strength: Grade B has slightly higher minimum yield strength and tensile strength than Grade A.

Nickel Content: Typically around 2.0% to 3.0% nickel, tailored for low-temperature toughness.

Heat Treatment: Often requires normalization to meet mechanical properties.

ASTM A203 Grade A: Lower strength, acceptable for less demanding pressure vessel parts.

ASTM A203 Grade B: Higher strength (min yield ~275 MPa), making it more common for higher pressure/temperature vessels.