ASTM A572 Gr.42 Steel Plates

Jan 22, 2025 Leave a message

ASTM-A572-A572M.pdf

ASTM A572-42 is a high-strength, low-alloy structural steel plate grade that's easily formable, machinable, and weldable.

 

What Is ASTM A572-42 Steel Plates?

ASTM A572-42 is a high-strength, low-alloy (HSLA) steel plate grade, commonly used in structural applications like bridges, buildings, and construction equipment. It offers a good strength-to-weight ratio and is known for its weldability, formability, and machinability. This grade is part of the broader ASTM A572 specification, which includes other grades like 50, 55, 60, and 65, each with slightly different mechanical properties.

 

What are the properties of ASTM A572 Grade 42?

Carbon. 0.21. 0.4. Mangenese. 1.35.

Phosphorus. 0.04. Sulfur. 0.05. Nickel. 0.015.

Vanadium. 0.06. Carbon Monoxide. 0.05.

Density. 7.8 g/cm3 20°C. Modulus of elasticity. 200 N/mm2. Thermal conductivity. 15 W/m.K.

Elongation (%) 20-24. Yield Strength. 290 min MPa. Tensile strength. 415 MPa.

 

What is ASTM A572 equivalent to?

Carbon Steel Grade Equivalents

American ASTM / ASME / SAE Europe EN Germany DIN
A572 Gr. 50 S355J2+N ST52-3N
  S275J2  
A619 DC03 ST13
A620 DC04 ST14

 

What is the difference between A572 and A36 steel?

As mentioned earlier, A36 is steel that has a minimum yield strength of 36,000 PSI. This grade derives its strength from a combination of carbon and manganese. On the other hand, A572-50, for example, is a type of steel with a minimum yield strength of 50,000 PSI.

 

What is the difference between ASTM A572 and s355?

Chemical Composition: ASTM A572 Grade 50 and S355JR have similar carbon content but differ slightly in manganese and other alloying elements. The slight differences can influence their mechanical properties and weldability.

 

Is A572 high carbon steel?

A572 is a low-carbon steel with good weldability and moderate strength, commonly used in structural applications.

 

What is the difference between 4140 and A572 steel?
A572 is a hot-rolled carbon steel that is used where a high strength to weight ratio is desired. A grade such as AISI 4140 offers decent corrosion resistance due to higher chromium and molybdenum content and is commonly used in firearm parts, pressurized gas tubes, and structural tubing for roll cages.

 

What is the difference between ASTM A500 and A572?
A572 is commonly used in the construction of bridges, buildings, and other structures that require a higher strength-to-weight ratio.

A500 is a cold-formed welded and seamless carbon steel structural tubing in round, square, and rectangular shapes. It is available in Grades A, B, C, and D.

 

Is A572 weathering steel?

No, ASTM A572 is not considered a weathering steel. While both A572 and weathering steels are high-strength, low-alloy steels, they have different characteristics and intended uses. A572 is a general-purpose structural steel, while weathering steels like ASTM A588 are specifically designed for enhanced atmospheric corrosion resistance.