GNEE STEEL supplies steel plate product of ASTM A515 spec, which is available in three grades having different strength levels: Grade 60; Grade 65; and Grade 70. ASTM A515 specification covers carbon-silicon steel plates primarily for intermediate and higher-temperature service in welded boilers and other pressure vessels.
For ASTM A515 Grade60 steel plate, max carbon content is 0.24 when thickness is below 25mm, 0.27 when thickness is between 25-50mm, 0.29 when thickness is 50-100mm, 0.31when thickness is larger than 100mm. Grade 65 and Grade 70 contains higher level of carbon.
About ASTM A515 Steel Plate
Thickness: 6mm to 300mm
Length: 3000mm to 15000mm
Width: 1500mm to 4050mm
Application: Pressure vessel plate, Boiler plate for high temperature service
Supplementary Technology: Annealing, normalizing plus tempering, or when the buyers agreed, Using blast or liquid quenching method accelerated cooling from austenitizing temperature, followed by tempering.
Surface: Coated or Shot Blasting and Painting
Delivery state: Hot Rolled
Steel Grade: Grade 60, Grade 65, Grade 70
ASTM A515 Chemical Composition
| ASTM A515 Chemical Composition | |||||
|---|---|---|---|---|---|
| Steel Grade | The Element Max (%) | ||||
| C | Mn | P | S | Si | |
| A515 grade 60 | 0.24-0.31 | 0.98 | 0.035 | 0.035 | 0.13-0.45 |
| A515 grade 65 | 0.28-0.33 | 0.98 | 0.035 | 0.035 | 0.13-0.45 |
| A515 grade 70 | 0.30-0.35 | 1.30 | 0.035 | 0.035 | 0.13-0.45 |
ASTM A515 Mechanical Property
| Steel Grade | ASTM A515 Mechanical Property | |||
|---|---|---|---|---|
| Thickness mm | Yield Min Mpa | Tensile Mpa | Elongation Min % | |
| A515 grade 60 | 200 | 220 | 415-550 | 21 |
| 50 | 25 | |||
| A515 grade 65 | 200 | 240 | 450-585 | 19 |
| 50 | 23 | |||
| A515 grade 70 | 200 | 260 | 485-620 | 17 |
| 50 | 21 | |||
ASTM A515 Equivalent Steel Grade
| Steel Grade | China | Japanese | Germany | France | Italy | Sweden | UK |
|---|---|---|---|---|---|---|---|
| ASTM A515 Grade 60 | GB 713 20g | JIS G3103 SB410 | DIN 1715 1.0425 | A48 CP,AP,FP | Fe 460-2-KW | SS21,02,01 | Gr 360,400 |
| ASTM A515 Grade 65 | GB 713 22g | JIS G3103 SB450 | DIN 1715 1.0435 | A48 CP,AP,FP | Fe 460-2-KW | SS21,02,01 | Gr 360,400 |
| ASTM A515 Grade 70 | JIS G3103 SB480 | DIN 1715 1.0844, | A48 CP,AP,FP | Fe 460-2-KW | SS21,02,01 | Gr 360,400 |
ASTM A515 Applications
Chemical Reaction Vessels
ASTM A515 Boiler and Pressure Vessel Steel Plate is used in synthesis reactions (such as ammonia synthesis towers in fertilizer plants and polymerization reactors in chemical plants). It needs to withstand high temperatures and pressures (e.g., the ammonia synthesis tower operates at a pressure of 30MPa and a temperature of 450℃) and medium corrosion (such as hydrogen and acid gases) to ensure no leakage or structural failure occurs during the reaction process.
Petrochemical Storage Tanks and Towers
ASTM A515 Low Temperature Pressure Vessel Steel Plate is used in storage tanks for crude oil, liquefied natural gas (LNG), and liquefied petroleum gas (LPG), as well as rectification towers and absorption towers in petroleum refining: normal temperature and pressure storage tanks (such as crude oil tanks); low-temperature storage tanks (such as LNG storage tanks, with temperatures as low as -162℃) require steel plates with excellent low-temperature toughness to avoid brittle fracture of steel at low temperatures; high-pressure hydrogenation towers (petrochemical hydrofining process).
Heat Exchange Vessels
ASTM A515 High-quality Boiler Steel Plate is used in equipment for medium heat exchange (such as shell-and-tube heat exchangers and plate heat exchangers). Their shells and tube sheets need to withstand alternating hot and cold shocks, ensure fatigue resistance, and avoid weld cracking caused by frequent temperature changes.
Metallurgical Industry
The "blast furnace hot blast stove" in steel plants (which stores high-temperature hot air, with a pressure of 0.5-1.5MPa and a temperature of 1200℃) uses high-temperature resistant ASTM A515 hot-rolled plate for its shell; the "autoclave" in non-ferrous metal smelting (such as the leaching autoclave in hydrometallurgical copper smelting) needs to be resistant to acid corrosion, and ASTM A515 pressure vessel steel plate is commonly used.
If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.
FAQ
Q: What is A515 70 material?
A: A515 Grade 70 is a type of carbon steel plate specified by ASTM and ASME standards for use in intermediate and higher temperature applications, such as boilers and pressure vessels. It has a high tensile strength range of 70-90 ksi (485-620 MPa) and a minimum yield strength of 38 ksi (260 MPa). This grade is often normalized to improve its mechanical properties.
Q: What is the equivalent of ASTM A515 Grade 70?
A: Equivalent material of ASTM A515 Grade 70 steel plate have JIS G3103 SB480, DIN 1715 1.0844, A48 CP,AP,FP; Fe 460-2-KW, SS21,02,01; Gr 360,400; ASTM A414 Grade F.
Q: What is the chemical composition of ASTM A515 Grade 70?
A: Chemical Composition: ASTM A515 plates typically consist of carbon, manganese, phosphorus, sulfur, and silicon, with specific limits on these elements to achieve desired mechanical properties.
Q: What is the difference between ASTM A515 Grade 70 and ASTM A516 Grade 70?
A: ASTM A515GR70 is designed for intermediate and higher-temperature service, while ASTM A516 Grade 70 is optimized for moderate and lower-temperature applications. A515 Grade 70 has a normalized structure for enhanced heat resistance, whereas A516 Grade 70 offers better toughness in colder environments.
Q: What is the difference between SA515 grade 70 and SA516 70?
A: SA-516-70 is a carbon steel plate specification for moderate and lower temperature service. SA515 GR 70 is a carbon-silicon steel plate for intermediate or higher temperature service. Maximum thickness: SA-516-70 has a maximum thickness of 204 mm, while SA515-GR-70 has a maximum thickness of 50 mm.
Q: What are the typical applications for ASTM A515 Grade 70?
A: A515 70 is commonly used in boilers, pressure vessels, heat exchangers, and petrochemical equipment due to its high strength and ability to withstand elevated temperatures.
Q: Is ASTM A515 Grade 70 suitable for welding?
A: Yes, ASTM A515 GR.70 has excellent weldability, thanks to its controlled carbon equivalent (Ceq). Proper welding procedures should be followed to maintain its properties.
Q: What are the available sizes for ASTM A515 Grade 70 plates?
A: Gangsteel offers ASTM A515GR70 plates in thicknesses from 6mm to 300mm, widths from 1500mm to 4050mm, and lengths from 3000mm to 15000mm, customizable to project requirements.
Q: Does ASTM A515 Grade 70 meet NACE MR0175 standards?
A: Yes, Gangsteel's ASTM A515GR.70 plates are tested for NACE MR0175 and HIC, ensuring suitability for sour service environments.
| Grades Of Pressure Vessel Plates Supplied By GNEE | |||||
| ASTM | ASTM A202/A202M | ASTM A202 Grade A | ASTM A202 Grade B | ||
| ASTM A203/A203M | ASTM A203 Grade A | ASTM A203 Grade B | ASTM A203 Grade D | ASTM A203 Grade E | |
| ASTM A203 Grade F | |||||
| ASTM A204/A204M | ASTM A204 Grade A | ASTM A204 Grade B | ASTM A204 Grade C | ||
| ASTM A285/A285M | ASTM A285 Grade A | ASTM A285 Grade B | ASTM A285 Grade C | ||
| ASTM A299/A299M | ASTM A299 Grade A | ASTM A299 Grade B | |||
| ASTM A302/A302M | ASTM A302 Grade A | ASTM A302 Grade B | ASTM A302 Grade C | ASTM A302 Grade D | |
| ASTM A387/A387M | ASTM A387 Grade 5 Class1 | ASTM A387 Grade 5 Class2 | ASTM A387 Grade 11 Class1 | ASTM A387 Grade 11 Class2 | |
| ASTM A387 Grade 12 Class1 | ASTM A387 Grade 12 Class2 | ASTM A387 Grade 22 Class1 | ASTM A387 Grade 22 Class2 | ||
| ASTM A515/A515M | ASTM A515 Grade 60 | ASTM A515 Grade 65 | ASTM A515 Grade 70 | ||
| ASTM A516/A516M | ASTM A516 Grade 55 | ASTM A516 Grade 60 | ASTM A516 Grade 65 | ASTM A516 Grade 70 | |
| ASTM A517/A517M | ASTM A517 Grade A | ASTM A517 Grade B | ASTM A517 Grade E | ASTM A517 Grade F | |
| ASTM A517 Grade P | ASTM A517 Grade J | ||||
| ASTM A533/A533M | ASTM A533 Grade A Class1 | ASTM A533 Grade B Class1 | ASTM A533 Grade C Class1 | ASTM A533 Grade D Class1 | |
| ASTM A533 Grade A Class2 | ASTM A533 Grade B Class2 | ASTM A533 Grade C Class2 | ASTM A533 Grade D Class2 | ||
| ASTM A533 Grade A Class3 | ASTM A533 Grade B Class3 | ASTM A533 Grade C Class3 | ASTM A533 Grade D Class3 | ||
| ASTM A537/A537M | ASTM A537 Class1 | ASTM A537 Class2 | ASTM A537 Class3 | ||
| ASTM A612/A612M | ASTM A612 | ||||
| ASTM A662/A662M | ASTM A662 Grade A | ASTM A662 Grade B | ASTM A662 Grade C | ||
| EN | EN10028-2 | EN10028-2 P235GH | EN10028-2 P265GH | EN10028-2 P295GH | EN10028-2 P355GH |
| EN10028-2 16MO3 | |||||
| EN10028-3 | EN10028-3 P275N | EN10028-3 P275NH | EN10028-3 P275NL1 | EN10028-3 P275NL2 | |
| EN10028-3 P355N | EN10028-3 P355NH | EN10028-3 P355NL1 | EN10028-3 P355NL2 | ||
| EN10028-3 P460N | EN10028-3 P460NH | EN10028-3 P460NL1 | EN10028-3 P460NL2 | ||
| EN10028-5 | EN10028-5 P355M | EN10028-5 P355ML1 | EN10028-5 P355ML2 | EN10028-5 P420M | |
| EN10028-5 P420ML1 | EN10028-5 P420ML2 | EN10028-5 P460M | EN10028-5 P460ML1 | ||
| EN10028-5 P460ML2 | |||||
| EN10028-6 | EN10028-6 P355Q | EN10028-6 P460Q | EN10028-6 P500Q | EN10028-6 P690Q | |
| EN10028-6 P355QH | EN10028-6 P460QH | EN10028-6 P500QH | EN10028-6 P690QH | ||
| EN10028-6 P355QL1 | EN10028-6 P460QL1 | EN10028-6 P500QL1 | EN10028-6 P690QL1 | ||
| EN10028-6 P355QL2 | EN10028-6 P460QL2 | EN10028-6 P500QL2 | EN10028-6 P690QL2 | ||
| JIS | JIS G3115 | JIS G3115 SPV235 | JIS G3115 SPV315 | JIS G3115 SPV355 | JIS G3115 SPV410 |
| JIS G3115 SPV450 | JIS G3115 SPV490 | ||||
| JIS G3103 | JIS G3103 SB410 | JIS G3103 SB450 | JIS G3103 SB480 | JIS G3103 SB450M | |
| JIS G3103 SB480M | |||||
| GB | GB713 | GB713 Q245R | GB713 Q345R | GB713 Q370R | GB713 12Cr1MoVR |
| GB713 12Cr2Mo1R | GB713 13MnNiMoR | GB713 14Cr1MoR | GB713 15CrMoR | ||
| GB713 18MnMoNbR | |||||
| GB3531 | GB3531 09MnNiDR | GB3531 15MnNiDR | GB3531 16MnDR | ||
| DIN | DIN 17155 | DIN 17155 HI | DIN 17155 HII | DIN 17155 10CrMo910 | DIN 17155 13CrMo44 |
| DIN 17155 15Mo3 | DIN 17155 17Mn4 | DIN 17155 19Mn6 | |||





