JIS G3103 SB480 Boiler and Pressure Vessel Steel Plate

Oct 27, 2025 Leave a message

Where SB480 Sits in JIS G3103

JIS G3103 is the Japanese standard for hot-rolled carbon steel and molybdenum alloy steel plates for boilers and other pressure vessels. It covers the carbon grades SB410, SB450 and SB480 together with the molybdenum-bearing grades SB450M and SB480M, and it is written for equipment that operates at elevated temperature and pressure rather than for room-temperature structural service. SB480 is the top of the carbon ladder: its 480-620 MPa tensile band places it above the 410-550 MPa band of SB410 and the 450-590 MPa band of SB450, so it is selected where the design stress requires more strength without moving to an alloy grade.

Scope, Strength and Thickness Limits

Item SB480 / SB480M data
Standard JIS G3103
Tensile strength range 480-620 MPa
Minimum yield strength, SB480M Above 275 MPa
Normalizing requirement Applied when plate thickness exceeds 38 mm
Closest ASTM equivalent ASTM A204/A204M Grade B molybdenum steel plate

The difference between SB480 and SB480M lies in the molybdenum addition: the M grades carry molybdenum to raise elevated-temperature strength and to keep the material stable where the design temperature is high enough that a plain carbon plate would lose strength. The plate is killed and fine grained, and because the applications are pressure boundaries the steel is tested on a heat basis with tensile, yield and elongation results recorded for the actual thickness supplied.

Why Normalizing Is Specified Above 38 mm

Heavy carbon plate cools slowly during rolling, which leaves a coarse ferrite and pearlite banding and a strength level that varies through the thickness. Normalizing above 38 mm resets the grain structure and produces a uniform ferrite-pearlite microstructure with predictable strength and toughness from surface to mid-wall. Normalizing is carried out within a controlled temperature range, followed by air cooling, and for pressure equipment it is often followed by a simulated post-weld heat treatment cycle on the test coupon so that the certified properties reflect the thermal history of the finished vessel rather than that of the plate as rolled.

Fabrication Behaviour

SB480 plate is welded into shells, heads, nozzles, tube sheets and supports, and the properties that matter most in the fabrication shop are consistent chemistry, low sulphur for resistance to solidification cracking and a carbon level that keeps the heat-affected zone from hardening excessively. Carbon is held low for the strength level involved, manganese supplies the strength, and phosphorus and sulphur are restricted so that the material can be formed and welded without preheating in thin sections and with controlled preheat in heavy ones. Cold forming of heads is carried out with attention to the forming direction relative to the rolling direction, and formed parts are normally given a stress-relief heat treatment at a temperature below any prior tempering treatment.

Application Areas

The grades of JIS G3103 are used for boilers, pressure vessels, heat exchangers, steam pipelines and pressure equipment components, and SB480 in particular appears in steam drum shells, header bodies and heavy nozzle sections where the stress level rules out the lower carbon grades. Because the standard excludes room-temperature and cold-temperature service as its primary scope, orders intended for low-temperature duty should be placed to a grade designed for that temperature range instead of relying on SB480 with added impact testing alone.

Supply, Testing and Documentation

Plate is supplied hot rolled or normalized according to thickness, with cut-to-size lengths available to suit shell and head layouts. Ultrasonic examination can be ordered to an agreed acceptance class for pressure-boundary plate, and simulated post-weld heat treatment of test coupons is available where the fabricator needs properties after the final heat treatment cycle. Each order is released with a mill test certificate showing heat number, chemical analysis, tensile and yield strength, elongation and the heat treatment condition, and independent third-party inspection can be arranged at the works before dispatch. Plates are marked with grade, heat number and size, stacked with edge protection and shipped by container or break bulk depending on tonnage and destination.

Frequently Asked Questions

Q: What is the difference between SB480 and SB480M?

A: SB480 is the carbon grade of JIS G3103 with a 480-620 MPa tensile range, while SB480M adds molybdenum to improve strength retention at elevated temperature and to keep the material stable in higher-temperature service.

Q: What is the minimum yield strength of SB480M?

A: SB480M is specified with a minimum yield strength above 275 MPa, applied within the thickness ranges fixed by the standard.

Q: When does SB480 plate need to be normalized?

A: Normalizing is required when plate thickness exceeds 38 mm, because the slower cooling of heavy plate otherwise leaves a non-uniform grain structure and inconsistent strength through the section.

Q: Which ASTM grade is closest to SB480M?

A: ASTM A204/A204M Grade B molybdenum steel plate is the closest equivalent in chemistry and purpose, since both provide elevated-temperature strength for pressure equipment.

Q: Can SB480 be used for low-temperature pressure vessels?

A: The scope of JIS G3103 excludes cold-temperature service as a primary application, so equipment for low-temperature duty should be ordered to a grade designed for low-temperature toughness.

Q: What certification accompanies the plate?

A: A mill test certificate is issued with heat number traceability, chemical analysis, tensile and yield results, elongation and the heat treatment condition, and simulated post-weld heat treatment coupons can be tested where required.