Composition Design of 13MnNiMoR
13MnNiMoR container plate is built on a manganese-nickel-molybdenum chemistry, and each element carries a clear job. Manganese provides solid solution strengthening and improves hardenability so that thick sections respond properly to normalising and tempering. Nickel is the toughness element: it lowers the ductile-to-brittle transition temperature and is the reason the grade can be used in equipment that sees low ambient or process temperatures. Molybdenum raises the tempering resistance and helps retain strength at moderately elevated service temperatures. Carbon is held at a modest level, consistent with a grade that has to remain weldable in heavy sections.
| Element | Function in the grade |
|---|---|
| Carbon | Modest level for strength while preserving toughness and weldability |
| Manganese | Solid solution strengthening and improved hardenability in thick plate |
| Nickel | Improved low temperature toughness and a lower transition temperature |
| Molybdenum | Tempering resistance and strength retention at temperature |
Residual elements are controlled in the same way as for other pressure vessel steels. Phosphorus and sulphur are kept at low levels because they segregate to grain boundaries and reduce both toughness and through-thickness ductility, which matters most in heavy welded joints.
Delivery Condition and Heat Treatment
13MnNiMoR is delivered normalised and tempered. The tempering temperature is not lower than 620 degrees Celsius, a requirement that ensures the plate is thoroughly softened after normalising and that the heat affected zone of subsequent welds behaves predictably. For plate thicker than 50 mm, and with the agreement of the purchaser, the steel may be supplied normalised with accelerated cooling followed by tempering, which is the usual way of achieving uniform properties through the thickness of heavy plate.
Mechanical Properties
| Property | Thickness range | Requirement |
|---|---|---|
| Yield strength | 6 to 100 mm | 390 MPa minimum |
| Yield strength | over 100 to 150 mm | 380 MPa minimum |
| Tensile strength | all sizes | 570 to 720 MPa |
| Elongation after fracture | all sizes | 18 % minimum |
| Impact absorbed energy | all sizes | 47 J minimum at 0 degrees Celsius |
| Bend test | all sizes | 180 degrees, test piece width 2a, mandrel diameter D = 3a |
Taken together, the tensile and impact values describe a steel that behaves like a high strength vessel plate with a toughness reserve rather than a strength-only product. That balance is what allows it to be used for thick wall shells and for equipment that has to survive both pressure and low temperature.
Performance in Service and Fabrication
Pressure containment: high yield with a wide tensile window allows efficient wall thickness design for medium and low temperature vessels.
Toughness: the nickel addition and controlled heat treatment keep values stable in thick sections.
Weldability: normalised and tempered structure with controlled preheat and low hydrogen practice gives sound joints.
Forming: suitable for cold forming within agreed limits and for hot forming followed by a restoring heat treatment.
Inspection: ultrasonic testing sheet by sheet to JB/T 4730.3 or GB/T 2970 is available with an agreed acceptance class.
Applications
Typical components include reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, boiler steam drums, nuclear reactor pressure shells, penstocks for hydroelectric stations and turbine spiral cases. In each case the driver is a combination of wall thickness, pressure and a service temperature at which toughness cannot be taken for granted.
Frequently Asked Questions
Q: What role does nickel play in 13MnNiMoR?
A: Nickel lowers the transition temperature and improves toughness, which is essential for thick pressure vessel plate.
Q: What tempering temperature is required?
A: The tempering temperature must not be lower than 620 degrees Celsius.
Q: What thickness of plate can be supplied?
A: The property table covers 6 mm to 150 mm, with a slightly lower yield requirement above 100 mm.
Q: What is the impact requirement?
A: A minimum absorbed energy of 47 J at 0 degrees Celsius in the Charpy V-notch test.
Q: Which standard covers the grade?
A: GB/T 713.2-2023 for steel plates and strips for pressure equipment with specified temperature properties.




