Grade Identification and Standard Basis
12Cr2Mo1R is a chromium molybdenum steel plate for pressure vessels operating at elevated temperature, in particular in hydrogen containing service. The designation records about 0.12 percent carbon, around 2 percent chromium, about 1 percent molybdenum and the R that marks pressure vessel application. In Chinese practice the plate is produced to GB/T 713-2014, the standard for steel plates for pressure vessels, which specifies the composition limits, the heat treatment condition, the mechanical properties and the acceptance rules for the grade. In the American system the corresponding material is the 2.25 Cr 1 Mo class of the alloy steel plate specification for pressure vessels, and projects that are executed to both codes commonly compare the two data sets during design.
The practical reason for the grade is hydrogen. At elevated temperature and high hydrogen partial pressure, carbon in steel can react with hydrogen and the steel can lose strength and crack. Chromium and molybdenum carbides are far more stable than the carbides in carbon steel, so the alloy resists hydrogen attack and keeps its strength at temperature. That is why this grade dominates the construction of hydrotreating and hydrocracking reactors and other high pressure, high temperature process vessels.
Composition, Heat Treatment and Properties
The composition window is narrow by design, because the balance between chromium, molybdenum and carbon controls both the high temperature strength and the toughness of the heat affected zone after welding.
| Element | Typical GB/T 713-2014 range |
|---|---|
| Carbon | 0.15 percent maximum |
| Silicon | 0.50 percent maximum |
| Manganese | 0.30 to 0.60 percent |
| Chromium | 2.00 to 2.50 percent |
| Molybdenum | 0.90 to 1.10 percent |
| Minimum yield strength | 310 MPa |
| Tensile strength | 510 to 640 MPa |
| Delivery condition | Normalized and tempered |
The plate is delivered normalized and tempered. Normalizing gives a uniform structure, and tempering at a high temperature produces the stable tempered bainitic structure with dispersed chromium and molybdenum carbides that provides the required strength and toughness. Because the finished reactor or drum is normally given a post weld heat treatment that lasts many hours, the mill can simulate that thermal cycle on test coupons and report the properties after simulated post weld heat treatment, which is what the vessel designer needs in order to confirm the design values.
Applications
The grade is used for the heavy wall, hot and pressurised parts of process plant. Typical equipment includes hydrotreating and hydrocracking reactors, heat exchangers, separators, spherical tanks, oil and gas storage vessels, liquefied gas tanks, nuclear reactor pressure shells and boiler drums. In refineries and petrochemical complexes it is the standard material for reactor shells, heads and nozzles working with hydrogen at temperature, and for the thick sections of drums where internal pressure combined with a large wall thickness governs the design.
Because these components are often too large to be shipped as a single plate, the grade is also supplied as formed and welded components, with the plate heat number maintained through the fabrication sequence so that the finished item can be traced back to the original plate tests.
Dimensional Control, Testing and Fabrication
Dimensions and shape tolerances follow GB/T 709, the standard for dimensions, shape, weight and permissible deviations of hot rolled steel plates, so thickness, width, length, flatness and edge condition are all verified against that document.
Theoretical weight is calculated using a steel density of 7.85 grams per cubic centimetre, which is the density adopted for weight calculation in the plate dimensional standard, so mass figures quoted on documents can be checked directly.
Ultrasonic examination of the plate is performed to the applicable non destructive testing method standard at the acceptance level agreed, and it is applied plate by plate for reactor quality material.
Tensile and impact testing is carried out on specimens taken from the heat treated plate, and additional testing after simulated post weld heat treatment is performed where the design requires it.
Welding uses matching chromium molybdenum consumables with controlled preheat and interpass temperature; the joint is post weld heat treated at a temperature that relieves stress without reducing base metal strength.
Marking carries the grade, the heat number and the plate identity, and the certificate records the chemical analysis, the heat treatment cycle, the mechanical results and the ultrasonic examination report.
Cleanliness of the steel matters as much as the composition for this application. Low phosphorus and sulphur levels, achieved by refining and vacuum degassing, protect the toughness of the weld heat affected zone and reduce the risk of temper embrittlement during the long post weld heat treatment applied to thick reactor walls.
Frequently Asked Questions
Q: Why is 12Cr2Mo1R used for hydrotreating reactors?
A: Because chromium and molybdenum form stable carbides that resist hydrogen attack and retain strength at elevated temperature. That combination is essential for vessels operating with hydrogen at high partial pressure and temperature.
Q: Which standard governs the plate?
A: GB/T 713-2014 sets the composition, heat treatment and property requirements. Dimensional and shape tolerances follow GB/T 709, and ultrasonic examination follows the applicable non destructive testing method standard at the agreed acceptance level.
Q: What are the typical mechanical properties?
A: A minimum yield strength of 310 MPa and a tensile strength range of 510 to 640 MPa, with impact testing used to verify toughness of the delivered and post weld heat treated material.
Q: How is theoretical weight calculated?
A: With a steel density of 7.85 grams per cubic centimetre, the value adopted in the plate dimensional standard, so the mass shown on inspection documents can be checked against the nominal dimensions of the plate.
Q: What is meant by PVQ in plate supply?
A: It indicates pressure vessel quality material, that is, plate produced and tested to pressure vessel requirements with full traceability, plate by plate ultrasonic examination where specified, and documentation suitable for coded equipment fabrication.

