S355JR+316L Clad steel plate Chemical Composition and Mechanical Property
|
Grade |
Chemical composition % MAX |
|||||||
|
THICKNESS(MM) |
C |
Mn |
Si |
P |
S |
N |
Cu |
|
|
S355JR |
≦40 |
0.24 |
1.6 |
0.55 |
0.035 |
0.035 |
0.012 |
0.55 |
|
>40 |
0.24 |
|||||||
|
|
Mechanical properties MIN |
|||||||
|
|
Yield Strength |
Tensile Strength |
Elongation in 2 in. |
|||||
|
≦16 |
355 |
470-680 |
14 |
|||||
|
>16, ≦100 |
315 |
|||||||
|
>100 |
275 |
450-600 |
||||||
| Grade |
C
|
Mn |
P
|
S
|
Si |
Cr |
Ni | Mo | Ni |
Cooper
|
| 316L(S31603) | 0.030 | 2.0 | 0.045 | 0.030 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.10 | - |
| Grade |
Yield strength (N/mm2), min |
Tensile strength (N/mm2), min |
Elongation in 2 in. (50mm), %, min |
|
Cold bend | ||||||
|
Austenitic (Chromium-Nickel) (Chromium-Manganese-Nickel) |
|||||||||||
| 316L(S31603) |
|
|
40 |
|
not required | ||||||
S355JR+316L Clad steel plate Application
S355JR+316L Clad steel plates are used in Construction of Bridges, Highway Construction and Other Engineering construction.
S355JR+316L Clad steel plate Other Name
S355JR+316L Clad steel plate, S355JR steel plate, 316L steel plate
Additional Condition
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
Used in marine corrosion-resistant structures (e.g., offshore platform brine tanks, seawater pipelines), S355JR+316L Clad steel or S355JR+304L Clad steel resists seawater chloride ion corrosion. If you need to understand pitting resistance in marine environments, bonding rate inspection methods, or obtain coastal project application cases, reach out to get a corrosion resistance analysis report.
Email: alloy@gneesteelgroup.com
Whatsapp (WeChat): +86 15824687445
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Clad steel plate | P265GH+410,S355JR+410,A516Gr70+316, A537CL1+304L,Q235B+304L,Q345B+304, A516Gr70(NACE)+410,A537CL1+904L, A537CL1+316L,A516Gr70+304L,A537CL1+304 ,A516Gr70+410,A516Gr70+904L |
2-300mm(Based plate),1-50mm(Composited plate) | / | UT, AR, TMCP.Normalized, Quenched and Tempered,Z Direction Test, Charpy V-Notch impact TestThe Third Party Test , Coated or Shot Blasting and Painting. |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |
Hot Tags: s355jr+316l clad steel plate, China s355jr+316l clad steel plate manufacturers, suppliers, factory
