In August 2025, we were honored to receive a client from Nigeria, who is a mechanical engineer. The company he works for is an engineering enterprise that provides engineering, management, and consulting services for the oil and gas industry in Africa.
The purpose of this client's visit was to inspect the ASTM A36 steel plates he had purchased (these steel plates would be used to construct two water tanks and one AGO storage tank in Ghana, which is one of his company's key projects in 2025). Additionally, he also gained an understanding of our steel processing capabilities and expressed the hope of conducting further cooperation with us in the near future.
Accompanied by our staff, the client carefully inspected the quality, grade, and specifications of the steel plates in the steel mill. Later, at the auxiliary processing plant, he had in-depth communications with the plant's engineers and learned in detail about process technologies such as blasting, painting, steel plate cutting, steel plate rolling, and welding. After the plant visit, the client was fully confident in the future cooperation between the two parties in the field of steel plate processing.
In the steel mill, we held discussions with the client regarding matters related to the steel plates.
During the meeting, we presented some of our engineering cases to the client, including the steel plate rolling, cutting, and welding services we provided for various tank projects in regions such as Papua New Guinea, Ghana, and Nigeria. The engineer highly praised our capabilities and expressed his willingness to cooperate with us in subsequent tank projects.
This inspection and communication with the Nigerian client not only successfully completed the quality verification of the ASTM A36 steel plates but also laid a solid foundation for long-term cooperation between the two parties. We have always believed that the core of industrial cooperation lies in "professional alignment and implementation of details" - only by deeply understanding the operating condition requirements of the client's project and relying on strict quality control and targeted service capabilities can we win the trust of international clients and contribute practical strength to the development of the oil and gas industry and infrastructure sector in Africa.
If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Clad steel plate | P265GH+410,S355JR+410,A516Gr70+316, A537CL1+304L,Q235B+304L,Q345B+304, A516Gr70(NACE)+410,A537CL1+904L, A537CL1+316L,A516Gr70+304L,A537CL1+304 ,A516Gr70+410,A516Gr70+904L |
2-300mm(Based plate),1-50mm(Composited plate) | / | UT, AR, TMCP.Normalized, Quenched and Tempered,Z Direction Test, Charpy V-Notch impact TestThe Third Party Test , Coated or Shot Blasting and Painting. |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |
