
A514 Grade B refers to a specific type of high-strength, quenched, and tempered Alloy steel plate.
It is part of the ASTM A514/A514M specification, which covers the standard requirements for quenched and tempered alloy steel plates for structural applications.
Grade B indicates a minimum yield strength of 100 ksi (690 MPa).
A514 Grade B material is commonly used in construction, mining equipment, cranes, and other heavy-duty applications that require high strength and toughness.
Chemical Composition of A514 Grade B material
| Element | Content (%) |
|---|---|
| Iron, Fe | 98 |
| Manganese, Mn | 0.85 |
| Chromium, Cr | 0.48 |
| Silicon, Si | 0.28 |
| Molybdenum, Mo | 0.2 |
| Titanium, Ti | 0.02 |
| Carbon, C | 0.12 - 0.210 |
| Vanadium, V | 0.05 |
| Boron, B | 0.003 |
Physical Properties of A514 Grade B material
The physical properties of AISI A514 grade B alloy steel are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.85 g/cm3 | 0.284 lb/in³ |
Mechanical Properties of A514 Grade B material
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 760-895 MPa | 110000-130000 psi |
| Yield strength (@ strain 0.200%) | 690 MPa | 100000 psi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 18% | 18% |
| Hardness, Brinell (@ thickness 9.50 mm/0.374 in, for plates) | 235-293 | 235-293 |
| Hardness, Knoop (converted from Brinell hardness) | 289 | 289 |
| Hardness, Rockwell B (converted from Brinell hardness) | 98 | 98 |
| Hardness, Rockwell C (converted from Brinell hardness) | 26 | 26 |
| Hardness, Vickers (converted from Brinell hardness) | 278 | 278 |

A514 steel plate is commonly used in heavy equipment parts that require a higher strength at a reduced weight, such as crane booms, mining equipment, hauling equipment, and lifting equipment.
In addition, A514 steel is particularly well suited for Wear resistant steel plates used for large tooling, digging, clearing, and scraping. Examples include scraper bars for coal mining conveyors and conveyor flights. Also, rock scraper blades and bucket scrapers for large mining and farm implements often use A514.
Other applications for A514 may include wear plates, screen plates, and wear bars. Finally, large mining and construction equipment often have heavy wear demands provided by A514.
Email: alloy@gneesteelgroup.com
Whatsapp (WeChat) :+86-15824687445
FAQ
Q: What is A514 Grade B material?
A: ASTM A514 Grade B is a quenched and tempered alloy steel plate for structural applications requiring high yield strength combined with good formability and toughness.
Q: What is A514 equivalent grade?
A: A514/T-1 Equivalent Grades
For projects requiring EN standard materials, EN S700 or EN690 may be possible alternatives to A514, depending on project requirements. Other Q&T steel plate grades have similar properties to A514 plate and may be suitable for use high wear and stress applications.
Q: What is the machinability of ASTM A514 Grade B?
A: Machinability: Moderate (requires carbide tools due to hardness). Structural Engineering: Bridge components, crane booms, and high-rise building frames. Heavy Equipment: Excavator arms, bulldozer blades, and mining machinery.2025年4月8日
Q: What is the strength of A514 steel?
A: 100,000 psi
A514 steel plate meets the ASTM International standard A514. This steel plate has a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |



