ASME A387 Grade 11 Class 1 is a type of chromium-molybdenum alloy steel plate used for welded boilers and pressure vessels designed for high-temperature service. It contains approximately 1.00−1.50% chromium and 0.45−0.65% molybdenum, providing good oxidation and corrosion resistance in environments like the oil and gas industry. Class 1 refers to a specific strength and performance level within the A387 Grade 11 specification.
ASTM A387 Grade 11 Class1(A387GR11CL1) Pressure Vessel And Boiler Steel Plate Chemical Composition and Mechanical Property
|
A387 Gr.11 CL.1Chemical Composition |
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
|
|
A387 Gr.11 Cl.1 |
0.04-0.17 |
0.44-0.86 |
0.35-0.73 |
0.035 |
0.035 |
0.94-1.56 |
0.40-0.70 |
|
Grade |
A387 Gr.11 CL.1Mechanical Property |
|||
|
Thickness |
Yield |
Tensile |
Elongation |
|
|
A387 Gr.11 Cl.1 |
mm |
Min Mpa |
Mpa |
Min % |
|
t≦50 |
240 |
415-585 |
22 |
|
|
50<t≦200 |
240 |
415-585 |
19 |
|
Equivalent steel grade of A387 Gr.11 Cl.1
|
Equivalent steel grade of A387 Gr.11 Cl.1 |
||||||||
|
Europe |
Belgium |
Germany |
France |
Italy |
Sweden |
India |
Japan |
U.K |
|
|
|
|
|
|
|
|
|
621 gr. A,B |
ASTM A387 Grade 11 Class1(A387GR11CL1) Pressure Vessel And Boiler Steel Plate Application
Chemical Reaction Vessels
A387 Grade 11 Class1 Boiler and Pressure Vessel Steel Plate is used in synthesis reactions (such as ammonia synthesis towers in fertilizer plants and polymerization reactors in chemical plants). It needs to withstand high temperatures and pressures (e.g., the ammonia synthesis tower operates at a pressure of 30MPa and a temperature of 450℃) and medium corrosion (such as hydrogen and acid gases) to ensure no leakage or structural failure occurs during the reaction process.
Petrochemical Storage Tanks and Towers
A387 Grade 11 Class1 Low Temperature Pressure Vessel Steel Plate is used in storage tanks for crude oil, liquefied natural gas (LNG), and liquefied petroleum gas (LPG), as well as rectification towers and absorption towers in petroleum refining: normal temperature and pressure storage tanks (such as crude oil tanks); low-temperature storage tanks (such as LNG storage tanks, with temperatures as low as -162℃) require steel plates with excellent low-temperature toughness to avoid brittle fracture of steel at low temperatures; high-pressure hydrogenation towers (petrochemical hydrofining process).
Heat Exchange Vessels
A387 Grade 11 Class1 High-quality Boiler Steel Plate is used in equipment for medium heat exchange (such as shell-and-tube heat exchangers and plate heat exchangers). Their shells and tube sheets need to withstand alternating hot and cold shocks, ensure fatigue resistance, and avoid weld cracking caused by frequent temperature changes.
Metallurgical Industry
The "blast furnace hot blast stove" in steel plants (which stores high-temperature hot air, with a pressure of 0.5-1.5MPa and a temperature of 1200℃) uses high-temperature resistant A387 Grade 11 Class1 hot-rolled plate for its shell; the "autoclave" in non-ferrous metal smelting (such as the leaching autoclave in hydrometallurgical copper smelting) needs to be resistant to acid corrosion, and A387 Grade 11 Class1 pressure vessel steel plate is commonly used.
ASTM A387 Grade 11 Class1(A387GR11CL1) Pressure Vessel And Boiler Steel Plate Other Name
ASTM A387 Grade 11 Class1(A387GR11CL1) Boiler steel plate,ASTM A387 Grade 11 Class1(A387GR11CL1) Pressure Vessel Steel plate, ASTM A387 Grade 11 Class1(A387GR11CL1) Storage Tanks Steel plate. ASTM A387 Grade 11 Class1(A387GR11CL1) Heat Exchanger Steel Plate.
Additional Condition
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.
FAQ
Q: What is A387 Grade 11 material?
A: The ASTM A387 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum intended primarily for use in welded boilers and pressure vessels designed for elevated temperature service.
Q: What is SA 387 GR 11 Cl 1 equivalent material?
A: Sa 387 Gr 11 Equivalent Material
With similar chromium, molybdenum, and chemical content the, Sa 387 Gr 11 Cl 1 Equivalent Material of the BS 621B exhibits identical properties.
Q: What temperature is SA 387 GR 11?
A: In the lower end of the temperature range SA 387 Gr 11 (1150 °F min tempering temperature) , and SA 387 Gr 22 (1250 °F min tempering temperature) are used. These grades can be specified in either class 1 or 2 and can also be provided in the Normalized & Tempered or Quenched and Tempered.
Q: What is the difference between SA 387 GR 11 cl1 and cl2?
A: The difference between SA 387 Grade 11 Class 1 and Class 2 Plate lies in their mechanical properties. However, they both have the same chemical composition. The tensile strength and yield strength of class 2 material is higher than that of class 1, whereas the elongation for class 1 is higher compared to class 2.
Q: What is SA 387 Grade 11 material?
A: Composition: ASME SA387 Grade 11 typically contains about 1% chromium and 0.5% molybdenum. This composition provides good strength and resistance to oxidation at high temperatures. Mechanical Properties: Yield Strength: Minimum of 205 MPa (30,000 psi)
Q: What is the difference between SA 387 Grade 11 CL 1 and Class 2?
A: The Chemical Composition remains the same in both Class 1 and Class 2 (Cl1 and Cl2) but the only Difference is in the Mechanical Properties which is mentioned in below Table.
Q: What is SA 387 Grade 11 Class 2 equivalent to?
A: Sa 387 Gr 11 Equivalent Material is the ASME SA387 in the US markets with the European Union having modules in 13CrMoSi5-5 grade. The Sa 387 Gr 11 Cl 2 Equivalent Material is the SA387-11-2 of the ASME and ASTM standard.
Q: What temperature is SA 387 GR 11?
A: In the lower end of the temperature range SA 387 Gr 11 (1150 °F min tempering temperature) , and SA 387 Gr 22 (1250 °F min tempering temperature) are used. These grades can be specified in either class 1 or 2 and can also be provided in the Normalized & Tempered or Quenched and Tempered.
Q: What is the chemical composition of ASTM A387 Grade 11 Class 2?
A: ASTM A387 GR 11 CL 2 Plates is designed with the composition of chemicals such as carbon, silicon, phosphorous, chromium, sulfur, molybdenum, and manganese. Alloy ASTM A387 is made with specifications such as different standards, finishing, hardness, form, width, and thickness.
Q: What is the difference between SA 516 GR 70 and SA 387 GR 11?
A: Compared to carbon steel plates, SA 387 Gr 11 plates offer superior corrosion and oxidation resistance while maintaining good tensile and yield strength. Compared to SA 516 Gr 70 plates, SA 387 Gr 11 plates have better resistance to oxidation and corrosion, making them a better choice for high-temperature environments.
| Grades Of Pressure Vessel Plates Supplied By GNEE | |||||
| ASTM | ASTM A202/A202M | ASTM A202 Grade A | ASTM A202 Grade B | ||
| ASTM A203/A203M | ASTM A203 Grade A | ASTM A203 Grade B | ASTM A203 Grade D | ASTM A203 Grade E | |
| ASTM A203 Grade F | |||||
| ASTM A204/A204M | ASTM A204 Grade A | ASTM A204 Grade B | ASTM A204 Grade C | ||
| ASTM A285/A285M | ASTM A285 Grade A | ASTM A285 Grade B | ASTM A285 Grade C | ||
| ASTM A299/A299M | ASTM A299 Grade A | ASTM A299 Grade B | |||
| ASTM A302/A302M | ASTM A302 Grade A | ASTM A302 Grade B | ASTM A302 Grade C | ASTM A302 Grade D | |
| ASTM A387/A387M | ASTM A387 Grade 5 Class1 | ASTM A387 Grade 5 Class2 | ASTM A387 Grade 11 Class1 | ASTM A387 Grade 11 Class2 | |
| ASTM A387 Grade 12 Class1 | ASTM A387 Grade 12 Class2 | ASTM A387 Grade 22 Class1 | ASTM A387 Grade 22 Class2 | ||
| ASTM A515/A515M | ASTM A515 Grade 60 | ASTM A515 Grade 65 | ASTM A515 Grade 70 | ||
| ASTM A516/A516M | ASTM A516 Grade 55 | ASTM A516 Grade 60 | ASTM A516 Grade 65 | ASTM A516 Grade 70 | |
| ASTM A517/A517M | ASTM A517 Grade A | ASTM A517 Grade B | ASTM A517 Grade E | ASTM A517 Grade F | |
| ASTM A517 Grade P | ASTM A517 Grade J | ||||
| ASTM A533/A533M | ASTM A533 Grade A Class1 | ASTM A533 Grade B Class1 | ASTM A533 Grade C Class1 | ASTM A533 Grade D Class1 | |
| ASTM A533 Grade A Class2 | ASTM A533 Grade B Class2 | ASTM A533 Grade C Class2 | ASTM A533 Grade D Class2 | ||
| ASTM A533 Grade A Class3 | ASTM A533 Grade B Class3 | ASTM A533 Grade C Class3 | ASTM A533 Grade D Class3 | ||
| ASTM A537/A537M | ASTM A537 Class1 | ASTM A537 Class2 | ASTM A537 Class3 | ||
| ASTM A612/A612M | ASTM A612 | ||||
| ASTM A662/A662M | ASTM A662 Grade A | ASTM A662 Grade B | ASTM A662 Grade C | ||
| EN | EN10028-2 | EN10028-2 P235GH | EN10028-2 P265GH | EN10028-2 P295GH | EN10028-2 P355GH |
| EN10028-2 16MO3 | |||||
| EN10028-3 | EN10028-3 P275N | EN10028-3 P275NH | EN10028-3 P275NL1 | EN10028-3 P275NL2 | |
| EN10028-3 P355N | EN10028-3 P355NH | EN10028-3 P355NL1 | EN10028-3 P355NL2 | ||
| EN10028-3 P460N | EN10028-3 P460NH | EN10028-3 P460NL1 | EN10028-3 P460NL2 | ||
| EN10028-5 | EN10028-5 P355M | EN10028-5 P355ML1 | EN10028-5 P355ML2 | EN10028-5 P420M | |
| EN10028-5 P420ML1 | EN10028-5 P420ML2 | EN10028-5 P460M | EN10028-5 P460ML1 | ||
| EN10028-5 P460ML2 | |||||
| EN10028-6 | EN10028-6 P355Q | EN10028-6 P460Q | EN10028-6 P500Q | EN10028-6 P690Q | |
| EN10028-6 P355QH | EN10028-6 P460QH | EN10028-6 P500QH | EN10028-6 P690QH | ||
| EN10028-6 P355QL1 | EN10028-6 P460QL1 | EN10028-6 P500QL1 | EN10028-6 P690QL1 | ||
| EN10028-6 P355QL2 | EN10028-6 P460QL2 | EN10028-6 P500QL2 | EN10028-6 P690QL2 | ||
| JIS | JIS G3115 | JIS G3115 SPV235 | JIS G3115 SPV315 | JIS G3115 SPV355 | JIS G3115 SPV410 |
| JIS G3115 SPV450 | JIS G3115 SPV490 | ||||
| JIS G3103 | JIS G3103 SB410 | JIS G3103 SB450 | JIS G3103 SB480 | JIS G3103 SB450M | |
| JIS G3103 SB480M | |||||
| GB | GB713 | GB713 Q245R | GB713 Q345R | GB713 Q370R | GB713 12Cr1MoVR |
| GB713 12Cr2Mo1R | GB713 13MnNiMoR | GB713 14Cr1MoR | GB713 15CrMoR | ||
| GB713 18MnMoNbR | |||||
| GB3531 | GB3531 09MnNiDR | GB3531 15MnNiDR | GB3531 16MnDR | ||
| DIN | DIN 17155 | DIN 17155 HI | DIN 17155 HII | DIN 17155 10CrMo910 | DIN 17155 13CrMo44 |
| DIN 17155 15Mo3 | DIN 17155 17Mn4 | DIN 17155 19Mn6 | |||





