Steel Standard:EN 10025-4
Rolling Type:Structural steel plate,low alloy steel plate
Thickness:6mm-500mm
Width:1500mm-4200mm
Length:3000mm-18000mm
Heat Treatment:Thermo-Mechanical Control Process (TMCP)
Structural S275ML,S275ML STEEL PLATE,S275ML STEEL SHEET is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 centigree.When rolling steel plate S275ML, the P and S contents can be 0.005% higher than the below table values.
Mechnical property for S275ML steel plate:
| Thickness (mm) | ||||||
| S275ML | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 |
| Yield strength (≥Mpa) | 275 | 265 | 255 | 245 | 245 | 240 |
| ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 | ||
| Tensile strength (Mpa) | 370-530 | 360-520 | 350-510 | 350-510 | 350-510 | |
Chemical composition for S275ML steel plate (Heat Analysis Max%)
| Main chemical elements composition of S275ML steel plate | ||||||
| C | Si | Mn | P | S | Nb | V |
| 0.13 | 0.50 | 1.50 | 0.025 | 0.020 | 0.05 | 0.08 |
| Al(total) | Ti | Cr | Ni | Mo | Cu | N |
| ≥0.02 | 0.05 | 0.30 | 0.30 | 0.10 | 0.55 | 0.015 |





