Introduction
When purchasing structural steel for construction or industrial projects, understanding the differences between S235, S275, and S355 grades is essential. These grades are defined under the EN 10025 standard and represent the most widely used materials in buildings, bridges, offshore structures, and heavy machinery.
This page provides a comparison of S235 yield strength, S275 yield strength, and S355 yield strength, along with their chemical composition, mechanical properties, and equivalent standards in ASTM, JIS, and other specifications.
S235 vs S275 vs S355 – Grade Overview
The designation system in EN 10025 is straightforward:
The letter "S" stands for structural steel.
The number represents the minimum yield strength in N/mm².
Therefore:
- S235 → minimum yield strength 235 MPa.
- S275 → minimum yield strength 275 MPa.
- S355 → minimum yield strength 355 MPa.
These grades also have suffixes like S235JR, S275JR, and S355JR, which indicate impact toughness requirements. For example, "JR" means the steel has been tested for impact at room temperature.
For more details on suffixes like JR, J2, and NL, see our guide: S355NL equivalent material

S235 vs S275 vs S355 structural steel
Mechanical Properties and Tensile Strength of S235, S275 and S355 Steel
The key difference among these grades lies in their strength.
| Property | S235 | S275 | S355 |
| Yield Strength (MPa) | 235 | 275 | 355 |
| Tensile Strength (MPa) | 360–510 | 370–530 | 470–630 |
| Elongation (%) | ≥26 | ≥23 | ≥22 |
| Impact Resistance | Basic | Improved | Excellent, suitable for low temperatures |
| Weldability | Excellent | Excellent | Good |
| Formability | High | Moderate | Lower |
From this comparison, it is clear that S355 yield strength offers a significant increase over S235 yield strength and S275 yield strength, making it the preferred choice for heavy load-bearing applications.
In practice, the difference between S235 and S275 is small for general use, but S355 vs S275 represents a significant jump in load capacity and resilience, especially under dynamic or cold conditions.
Products DescriptionChemical Composition of S235, S275 and S355 (C & Mn Comparison)
The difference in yield strength comes primarily from the carbon and manganese content.
| Grade | Carbon (C %) | Manganese (Mn %) | Explanation |
|---|---|---|---|
| S235 | ≤0.17 | ≤1.40 | Low carbon, excellent weldability, lower strength |
| S275 | ≤0.21 | ≤1.50 | Slightly higher carbon & manganese, balanced properties |
| S355 | ≤0.24 | ≤1.60 | Higher C & Mn levels, resulting in higher yield strength |
Engineers should note that while increasing C and Mn enhances strength, it can slightly reduce weldability.
Cost & Availability Comparison
| Grade | Relative Cost | Typical Availability | Notes |
| S235 | 100% (baseline) | Common stock | Widely available in all thicknesses |
| S275 | +10–15% | Common stock | Standard for general construction |
| S355 | +25–30% | Some sizes need rolling | Higher strength, less stock flexibility |
For most export orders or construction projects, S235 and S275 are generally available from warehouse stock, while S355 may require custom rolling for thicker plates or uncommon dimensions.
Applications of S235 / S275 / S355 Structural Steel
Choosing between S235, S275, and S355 depends on both structural requirements and project environment.
S235 – For Light Structures and General Fabrication
Ideal for frames, fences, containers, and small workshops.
High weldability and formability make it easy for fabrication and assembly.
Best choice for low-load, cost-sensitive projects.
S275 – For Medium-Strength Structures
Common in commercial buildings, bridges, and heavy machinery bases.
Offers a good balance between strength, ductility, and price.
Often used when S235 is too soft but S355 is unnecessary.
S355 – For Heavy-Duty or Dynamic Loads
Used in bridges, offshore platforms, wind towers, and high-rise structures.
Superior yield strength and impact toughness, especially in low temperatures.
Though costlier, its long-term durability and load efficiency justify the investment.
S235, S275 and S355 Material Equivalents
In global procurement, buyers often care about S235 steel equivalent, S275 material equivalent, or S355 steel equivalent to ensure compatibility with regional standards such as ASTM, JIS, or GB.
Below is a simplified equivalence chart:
| EN Standard | ASTM Equivalent | JIS Equivalent | GB Equivalent |
| S235JR | ASTM A36 | SS400 | Q235B |
| S275JR | ASTM A36 / ASTM A529 | SM400A / B | Q275 |
| S355JR | ASTM A572 | SM490A / B | Q345B |
How to Choose Between S235, S275, and S355 Steel Grades
| Project Type | Recommended Grade | Reason |
| Light framing, warehouse structure | S235 | Easy fabrication, lowest cost |
| Commercial or bridge structure | S275 | Higher load capacity, moderate cost |
| Offshore or high-rise building | S355 | High strength, excellent toughness |
If you are comparing S275 vs S355, consider not only the static load but also the environmental factors - such as wind, vibration, and temperature. For example, S355 performs significantly better in offshore or cold regions due to its higher impact resistance.
Conclusion
When choosing between S235 vs S275 vs S355, the best grade depends on your project's strength requirement, budget, and delivery schedule.
S235 – Economical, easy to fabricate.
S275 – Balanced performance and cost.
S355 – Premium grade for demanding structures.
For most construction exporters and distributors, a combination of S235 and S275 ensures quick delivery, while S355 is reserved for projects where safety and durability are paramount.
If you want to learn more about GNEE's products, you can send an email to alloy@gneesteelgroup.com. We are more than happy to assist you.


Frequently Asked Questions
Q: What is the main difference between S235, S275, and S355 steel?
A: The main difference lies in yield strength - 235, 275, and 355 MPa respectively - and their corresponding applications. S355 offers the best performance for high-load or harsh environments.
Q: Which grade is best for construction projects?
A: For general building structures, S275 is the most widely used. For bridges or wind towers, S355 is preferred due to better toughness and fatigue resistance.
Q: Can I use S235 instead of S275?
A: Yes, for light structures or fabrication projects where load demands are low. But for safety-critical parts, S275 or S355 is more reliable.
What is S235 grade steel?
Description. S235 grade steel is a readily weldable low carbon manganese steel with good impact resistance (including in sub-zero temperatures).
What is the steel equivalent of S235?
S235JR equivalent grade in India is IS2062 grade B. How to prove it? Let us check it as below. S235JR carbon steel plate is common carbon structural steel that can be used in a very broad range of fabrication processes.
What is the difference between S235 and S355?
Although the strength varies, the chemical composition of S235 and S355 is nearly identical. The difference is mainly in the rolling and cooling techniques, which affect mechanical properties such as yield strength and tensile strength
What is the difference between ASTM A36 and S235?
ASTM A36 has stricter limits on carbon content (≤0.26%), ensuring consistent quality. S235JR has tighter controls on phosphorus and sulfur, enhancing weldability
What is S355 steel grade?
Description. S355 grade steel is a medium tensile, low carbon manganese steel which is readily weldable and possesses good impact resistance (also in sub-zero temperatures).
What is equivalent to S355 steel plate?
A572-50
S355 Equivalent Plate Grade
ASTM has identified A572-50 as an acceptable substitution for S355. Both grades have similar chemical compositions and are high-strength, low-alloy structural steels.
What is the difference between A36 and S355?
ASTM A36 is a mild carbon steel with good weldability, machinability, and low cost, making it ideal for general structural purposes. It offers a minimum yield strength of 250 MPa. S355, on the other hand, is a high-strength low-alloy steel under EN 10025-2, with yield strength starting from 355 MPa.
What is S275 steel grade?
S275 is a very popular low carbon steel grade suitable for numerous general engineering and structural applications. Supplied as a hot rolled non alloy steel it is used widely in the construction, maintenance and manufacturing industries.
Which is better, S275 or S355?
Overall, both S275 structural steel and S355 construction steel have good mechanical strength and versatility of use. S355 steel has a higher price than the S275 type. Despite this price difference, S355 structural steel is often preferred due to its lower structural weight compared to S275 type
Is S275 equivalent to A36?
ASTM A36 plates have a min. yield strength of 250 MPa and S275JR carbon steel plate has a yield of 275 MPa. And the tensible strength of S275JR carbon steel plate is also little higher than that of ASTM A36 plates. So it is not right to say "S275JR equivalent to ASTM A36".
| Grades Of Carbon and Low-alloy High-strength Steels Supplied By GNEE | |||||
| ASTM/ASME | ASTM A36/A36M | ASTM A36 | |||
| ASTM A283/A283M | ASTM A283 Grade A | ASTM A283 Grade B | ASTM A283 Grade C | ASTM A283 Grade D | |
| ASTM A514/A514M | ASTM A514 Grade A | ASTM A514 Grade B | ASTM A514 Grade C | ASTM A514 Grade E | |
| ASTM A514 Grade F | ASTM A514 Grade H | ASTM A514 Grade J | ASTM A514 Grade K | ||
| ASTM A514 Grade M | ASTM A514 Grade P | ASTM A514 Grade Q | ASTM A514 Grade R | ||
| ASTM A514 Grade S | ASTM A514 Grade T | ||||
| ASTM A572/A572M | ASTM A572 Grade 42 | ASTM A572 Grade 50 | ASTM A572 Grade 55 | ASTM A572 Grade 60 | |
| ASTM A572 Grade 65 | |||||
| ASTM A573/A573M | ASTM A573 Grade 58 | ASTM A573 Grade 65 | ASTM A573 Grade 70 | ||
| ASTM A588/A588M | ASTM A588 Grade A | ASTM A588 Grade B | ASTM A588 Grade C | ASTM A588 Grade K | |
| ASTM A633/A633M | ASTM A633 Grade A | ASTM A633 Grade C | ASTM A633 Grade D | ASTM A633 Grade E | |
| ASTM A656/A656M | ASTM A656 Grade 50 | ASTM A656 Grade 60 | ASTM A656 Grade 70 | ASTM A656 Grade 80 | |
| ASTM A709/A709M | ASTM A709 Grade 36 | ASTM A709 Grade 50 | ASTM A709 Grade 50S | ASTM A709 Grade 50W | |
| ASTM A709 Grade HPS 50W | ASTM A709 Grade HPS 70W | ASTM A709 Grade 100 | ASTM A709 Grade 100W | ||
| ASTM A709 Grade HPS 100W | |||||
| ASME SA36/SA36M | ASME SA36 | ||||
| ASME SA283/SA283M | ASME SA283 Grade A | ASME SA283 Grade B | ASME SA283 Grade C | ASME SA283 Grade D | |
| ASME SA514/SA514M | ASME SA514 Grade A | ASME SA514 Grade B | ASME SA514 Grade C | ASME SA514 Grade E | |
| ASME SA514 Grade F | ASME SA514 Grade H | ASME SA514 Grade J | ASME SA514 Grade K | ||
| ASME SA514 Grade M | ASME SA514 Grade P | ASME SA514 Grade Q | ASME SA514 Grade R | ||
| ASME SA514 Grade S | ASME SA514 Grade T | ||||
| ASME SA572/SA572M | ASME SA572 Grade 42 | ASME SA572 Grade 50 | ASME SA572 Grade 55 | ASME SA572 Grade 60 | |
| ASME SA572 Grade 65 | |||||
| ASME SA573/SA573M | ASME SA573 Grade 58 | ASME SA573 Grade 65 | ASME SA573 Grade 70 | ||
| ASME SA588/SA588M | ASME SA588 Grade A | ASME SA588 Grade B | ASME SA588 Grade C | ASME SA588 Grade K | |
| ASME SA633/SA633M | ASME SA633 Grade A | ASME SA633 Grade C | ASME SA633 Grade D | ASME SA633 Grade E | |
| ASME SA656/SA656M | ASME SA656 Grade 50 | ASME SA656 Grade 60 | ASME SA656 Grade 70 | ASME SA656 Grade 80 | |
| ASME SA709/SA709M | ASME SA709 Grade 36 | ASME SA709 Grade 50 | ASME SA709 Grade 50S | ASME SA709 Grade 50W | |
| ASME SA709 Grade HPS 50W | ASME SA709 Grade HPS 70W | ASME SA709 Grade 100 | ASME SA709 Grade 100W | ||
| ASME SA709 Grade HPS 100W | |||||
| EN10025 | EN10025-2 | EN10025-2 S235J0 | EN10025-2 S275J0 | EN10025-2 S355J0 | EN10025-2 S355K2 |
| EN10025-2 S235JR | EN10025-2 S275JR | EN10025-2 S355JR | EN10025-2 S420J0 | ||
| EN10025-2 S235J2 | EN10025-2 S275J2 | EN10025-2 S355J2 | |||
| EN10025-3 | EN10025-3 S275N | EN10025-3 S355N | EN10025-3 S420N | EN10025-3 S460N | |
| EN10025-3 S275NL | EN10025-3 S355NL | EN10025-3 S420NL | EN10025-3 S460NL | ||
| EN10025-4 | EN10025-4 S275M | EN10025-4 S355M | EN10025-4 S420M | EN10025-4 S460M | |
| EN10025-4 S275ML | EN10025-4 S355ML | EN10025-4 S420ML | EN10025-4 S460ML | ||
| EN10025-6 | EN10025-6 S460Q | EN10025-6 S460QL | EN10025-6 S460QL1 | EN10025-6 S500Q | |
| EN10025-6 S500QL | EN10025-6 S500QL1 | EN10025-6 S550Q | EN10025-6 S550QL | ||
| EN10025-6 S550QL1 | EN10025-6 S620Q | EN10025-6 S620QL | EN10025-6 S620QL1 | ||
| EN10025-6 S690Q | EN10025-6 S690QL | EN10025-6 S690Q1 | EN10025-6 S890Q | ||
| EN10025-6 S890QL | EN10025-6 S890QL1 | EN10025-6 S960Q | EN10025-6 S960QL | ||
| JIS | JIS G3101 | JIS G3101 SS330 | JIS G3101 SS400 | JIS G3101 SS490 | JIS G3101 SS540 |
| JIS G3106 | JIS G3106 SM400A | JIS G3106 SM400B | JIS G3106 SM400C | JIS G3106 SM490A | |
| JIS G3106 SM490YA | JIS G3106 SM490B | JIS G3106 SM490YB | JIS G3106 SM490C | ||
| JIS G3106 SM520B | JIS G3106 SM520C | JIS G3106 SM570 | |||
| DIN | DIN 17100 | DIN17100 St52-3 | DIN17100 St37-2 | DIN17100 St37-3 | DIN17100 RSt37-2 |
| DIN17100 USt37-2 | |||||
| DIN 17102 | DIN17102 StE315 | DIN17102 EStE315 | DIN17102 TStE315 | DIN17102 WStE315 | |
| DIN17102 StE355 | DIN17102 EStE355 | DIN17102 TStE355 | DIN17102 WStE355 | ||
| DIN17102 StE380 | DIN17102 EStE380 | DIN17102 TStE380 | DIN17102 WStE380 | ||
| DIN17102 StE420 | DIN17102 EStE420 | DIN17102 TStE420 | DIN17102 WStE420 | ||
| DIN17102 StE460 | DIN17102 EStE460 | DIN17102 TStE460 | DIN17102 WStE460 | ||
| DIN17102 StE500 | DIN17102 EStE500 | DIN17102 TStE500 | DIN17102 WStE500 | ||
| DIN17102 EStE285 | |||||
| GB | GB/T700 | GB/T700 Q235A | GB/T700 Q235B | GB/T700 Q235C | GB/T700 Q235D |
| GB/T700 Q275 | |||||
| GB/T1591 | GB/T1591 Q345A | GB/T1591 Q390A | GB/T1591 Q420A | GB/T1591 Q420E | |
| GB/T1591 Q345B | GB/T1591 Q390B | GB/T1591 Q420B | GB/T1591 Q460C | ||
| GB/T1591 Q345C | GB/T1591 Q390C | GB/T1591 Q420C | GB/T1591 Q460D | ||
| GB/T1591 Q345D | GB/T1591 Q390D | GB/T1591 Q420D | GB/T1591 Q460E | ||
| GB/T1591 Q345E | GB/T1591 Q390E | ||||
| GB/T16270 | GB/T16270 Q550C | GB/T16270 Q550D | GB/T16270 Q550E | GB/T16270 Q550F | |
| GB/T16270 Q620C | GB/T16270 Q620D | GB/T16270 Q620E | GB/T16270 Q620F | ||
| GB/T16270 Q690C | GB/T16270 Q690D | GB/T16270 Q690E | GB/T16270 Q690F | ||
| GB/T16270 Q800C | GB/T16270 Q800D | GB/T16270 Q800E | GB/T16270 Q800F | ||
| GB/T16270 Q890C | GB/T16270 Q890D | GB/T16270 Q890E | GB/T16270 Q890F | ||
| GB/T16270 Q960C | GB/T16270 Q960D | GB/T16270 Q960E | GB/T16270 Q960F | ||
| GB/T16270 Q500 | |||||



