SA516-Gr70 and SA515-GR70 are both grades of steel used in pressure vessel applications, but there are some key differences between them:
Material properties

- SA516-Gr70 is a carbon steel plate specification for moderate and lower temperature service.
- SA515 GR 70 is a carbon-silicon steel plate for intermediate or higher temperature service.
Maximum thickness:
SA516-Gr70 has a maximum thickness of 204 mm, while SA515-GR70 has a maximum thickness of 50 mm.
Tensile strength:
SA516-Gr70 typically has higher tensile strength compared to SA515 GR 70.
Applications
- SA516-Gr70 is commonly used for pressure vessels where moderate and lower temperature service is required.
- SA515 GR 70 is used for intermediate and higher temperature service applications.
ASME standards

Both materials adhere to specific ASME standards for pressure vessel applications.
When choosing between these two materials, it's important to consider the application's specific requirements in terms of temperature, pressure, and other mechanical properties to select the most suitable material.
Email: alloy@gneesteelgroup.com
Whatsapp (WeChat) :+86-15824687445
FAQ
Q: What is SA 515 GR 70 material?
A: Material properties:
SA515 GR 70 is a carbon-silicon steel plate for intermediate or higher temperature service.
Q: What is A516 gr 70 steel equivalent to?
A: EN10028-2 P355GH steel
The mentioned ASTM A516 gr 70 equivalent EN steel is EN10028-2 P355GH steel.
Q: What is the difference between SA-516-70 and SA 285 GR C?
A: Sa-285 Gr C and Sa-516-70 both are Pressure vessel plates. The Sa-516-70 has a higher tensile and yield strength than the Sa 285 grade, which is the main difference between them.
Q: What is the difference between SA516 grade 60 and 70?
A: The main difference between the two plates is their minimum yield strength: ASME SA516 Grade 60 Plate has a yield strength of 60,000 PSI (410 MPa), while SA 516 GR. 70 has a yield strength of 70,000 PSI (485 MPa). ASTM A516 Grade 60 Plate, ASTM A516 Grade 70 Plate, ASME SA516 Gr
Q: What is the equivalent of ASTM A515 Grade 70?
A: Equivalent material of ASTM A515 Grade 70 steel plate have JIS G3103 SB480, DIN 1715 1.0844, A48 CP,AP,FP; Fe 460-2-KW, SS21,02,01; Gr 360,400; ASTM A414 Grade F.
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |






