S355JR and S355MC: One Number, Two Very Different Steels
S355JR and S355MC share the figure 355 in their designation, which stands for a nominal minimum yield strength of 355 MPa. Beyond that number the two materials have little in common. S355JR is a general structural steel defined by EN 10025-2 and is supplied mainly as plate for welded load-bearing structures. S355MC is a high-strength low-alloy steel defined by EN 10149-2, produced as thermomechanically rolled coil and optimised for cold forming in automotive and general equipment manufacturing.
Standard Basis and Grade Naming
S355JR - EN 10025-2, non-alloy structural steels. The letter S denotes structural steel, 355 is the minimum yield strength in MPa at thickness up to 16 mm, and JR indicates Charpy impact testing at +20 °C.
S355MC - EN 10149-2, hot-rolled flat products of high yield strength steel for cold forming. M indicates thermomechanical rolling and C indicates suitability for cold forming.
One grade is therefore a plate specification written for welded construction and the other a coil specification written for forming lines.
Chemical Composition Compared
| Element (ladle, max %) | S355JR | S355MC |
|---|---|---|
| Carbon | 0.24 | 0.12 |
| Silicon | 0.55 | 0.50 |
| Manganese | 1.60 | 1.60 |
| Phosphorus | 0.035 | 0.025 |
| Sulphur | 0.035 | 0.015 |
| Aluminium (min) | not specified | 0.015 |
| Niobium + Vanadium + Titanium | not specified | 0.22 in total |
| Carbon equivalent (max) | 0.45 | not specified, low in practice |
S355MC is deliberately leaner in carbon, phosphorus and sulphur and carries microalloying additions of niobium, vanadium and titanium. Together with controlled thermomechanical rolling, those additions produce the fine grain structure that delivers strength without a heavy alloy content, and they keep the carbon equivalent low enough for good weldability.
Mechanical Properties Compared
| Property | S355JR (EN 10025-2) | S355MC (EN 10149-2) |
|---|---|---|
| Minimum yield strength | 355 MPa (thickness ≤ 16 mm) | 355 to 510 MPa, by thickness class |
| Tensile strength | 470 to 630 MPa | 430 to 550 MPa |
| Charpy impact | 27 J minimum at +20 °C, longitudinal | L variants cover low temperature service |
| Delivery condition | As-rolled, normalized or normalized rolled | Thermomechanically rolled |
| Typical product form | Plate and cut shapes | Pickled and oiled coil or sheet |
S355JR is specified so that a welded structure yields safely, hence its wide tensile window and generous ductility. S355MC is specified to carry load at low weight after forming, hence its narrower strength window and ductility defined against the forming operation rather than against a welded joint.
Forming, Welding and Typical Applications
Forming. S355MC is designed for cold bending, folding and flanging without cracking, and its fine grain allows tight bend radii. S355JR is formed hot or by simple cold bending and is not intended for severe cold forming.
Welding. Both grades weld with common arc processes. S355JR at a carbon equivalent of 0.45 maximum behaves like a conventional structural steel. S355MC is even leaner chemically, but excessive welding heat input can reduce strength in the heat-affected zone because its strength comes from thermomechanical rolling, so post-weld heat treatment should be applied only where the design demands it.
Applications. S355JR is used for building frames, bridges, storage tanks, machine bases and general welded fabrication. S355MC is used for automotive chassis and structural parts, cold-formed profiles, brackets, and crane or conveyor components where a high strength-to-weight ratio matters more than weldability.
Frequently Asked Questions
Q: What is the main difference between S355JR and S355MC?
S355JR is a non-alloy structural steel plate under EN 10025-2 intended for welded construction, while S355MC is a thermomechanically rolled high-strength low-alloy steel under EN 10149-2 intended for cold forming.
Q: Is S355MC stronger than S355JR?
Yes. S355MC is specified from 355 MPa upwards and can reach 510 MPa depending on thickness class, while S355JR has a fixed 355 MPa minimum.
Q: Can S355JR be used for cold forming?
Only for mild operations. Severe cold forming such as tight-radius flanging is better served by S355MC.
Q: Can S355MC be welded?
Yes. Its low carbon content and low carbon equivalent make it readily weldable, but heat input must be controlled so that the thermomechanically rolled properties are not degraded in the heat-affected zone.
Q: Are S355JR and S355MC interchangeable?
No. They differ in standard, product form, chemistry and delivery condition, so any substitution requires a fresh check of strength, toughness and the manufacturing route.
Q: Which grades are comparable to S355MC?
Close cold-forming alternatives include QStE360TM under DIN, SPFH540 under JIS and the VDA designation HR340LA, which are approximations only.
Q: Which grade suits low temperature service?
Neither is ideal below zero degrees. For sub-zero duty consider S355J2 under EN 10025-2 with impact testing at -20 °C, or the normalized fine-grain grades S355N and S355NL under EN 10025-3.





