Difference between DNV D460 and DNV D500 steel plate

DNV D460 is an extra-high-strength structural steel plate certified by DNV (Det Norske Veritas) for marine and offshore applications . The "D" designation signifies that the material's impact toughness is tested and guaranteed at -20°C . It has a minimum yield strength of 460 MPa (67 ksi) and tensile strength ranging from 570 to 720 MPa (83-105 ksi), with minimum elongation of 17% . Impact energy requirements are minimum 31J (transverse) or 46J (longitudinal) at -20°C . The chemical composition is strictly controlled with carbon ≤0.20% and manganese ≤1.70% . This grade is typically supplied in thermomechanical controlled processed (TMCP) or normalized conditions . It is widely used for hull construction, offshore platforms, and marine structures operating in cold environments.

DNV D500 is an extra-high-strength structural steel plate also certified by DNV with impact toughness tested at -20°C . The "500" denotes a minimum yield strength of 500 MPa (73 ksi) . It has a tensile strength ranging from 610 to 770 MPa (89-111 ksi) and minimum elongation of 16% . Impact energy requirements are minimum 33J (transverse) or 50J (longitudinal) at -20°C . The chemical composition features carbon ≤0.20%, manganese ≤1.70%, with microalloying elements including Nb, V, and Ti . This grade requires advanced processing and is typically supplied in quenched and tempered (QT) or TMCP conditions . It is designed for demanding structural components in shipbuilding, mobile offshore drilling units, and marine structures requiring superior strength-to-weight ratio.

Both DNV D460 and DNV D500 are DNV-certified extra-high-strength marine steels with impact toughness tested at -20°C, ensuring reliable performance in cold marine environments . Their primary difference lies in strength level: D460 offers a minimum yield strength of 460 MPa with tensile strength of 570-720 MPa, suitable for high-strength hull construction and offshore structures , while D500 provides a higher minimum yield strength of 500 MPa with tensile strength reaching 610-770 MPa, designed for more demanding load-bearing applications requiring superior strength. Both grades feature controlled chemical composition with carbon ≤0.20% and manganese ≤1.70% , and require advanced processing like TMCP or QT to achieve their mechanical properties while maintaining good weldability for critical marine service.

Chemical Composition

Mechanical Property