Introduction to SS400 Steel Plate

SS400 steel plate is a widely used structural steel known for its versatility, cost-effectiveness, and reliable mechanical properties. Originating from the Japanese Industrial Standard (JIS G3101), SS400 is a low-carbon steel commonly employed in construction, bridges, buildings, and other structural engineering projects. This guide explores the key properties, applications, and considerations of SS400 steel plates, optimized for professionals seeking insights into structural steel solutions.
Chemical Composition of SS400 Steel Plate
The chemical makeup of SS400 steel contributes to its balanced strength and ductility, making it suitable for a wide range of applications. According to JIS G3101, SS400 does not have strict chemical composition requirements, but typical compositions include:
- Carbon (C): ≤ 0.25%
- Manganese (Mn): ≤ 1.40%
- Phosphorus (P): ≤ 0.05%
- Sulfur (S): ≤ 0.05%
- Silicon (Si): Not specified, typically trace amounts
This low-carbon content ensures good weldability and formability, critical for structural engineering projects requiring fabrication flexibility.
Keywords: SS400 chemical composition, low-carbon structural steel, weldability of SS400, JIS G3101 steel properties.
Mechanical Properties of SS400 Steel Plate
The mechanical properties of SS400 steel plate make it a preferred choice for structural applications. Key properties include:
- Yield Strength: ≥ 245 MPa (for thicknesses ≤ 16 mm), decreasing slightly with increased thickness
- Tensile Strength: 400–510 MPa
- Elongation: ≥ 17% (for thicknesses ≤ 5 mm), ≥ 21% (for thicknesses > 5 mm)
- Hardness: Moderate, suitable for general structural use
- Impact Resistance: Good at ambient temperatures, though not specifically tested under JIS G3101
These properties provide a balance of strength, toughness, and ductility, making SS400 ideal for load-bearing structures like beams, columns, and frameworks.
Keywords: SS400 mechanical properties, yield strength SS400, tensile strength structural steel, JIS G3101 mechanical properties
Applications of SS400 Steel Plate in Structural Engineering
SS400 steel plates are extensively used in various structural engineering projects due to their cost-effectiveness and reliable performance. Common applications include:

- Building Frameworks: Used in columns, beams, and floor plates for commercial and residential buildings.
- Bridge Construction: Employed in bridge girders and supports for its strength and weldability.
- Industrial Structures: Ideal for warehouses, factories, and heavy equipment platforms.
- Shipbuilding and Marine Structures: Used in non-critical components due to its corrosion resistance with proper coating.
- General Fabrication: Suitable for manufacturing brackets, base plates, and other structural components.
The versatility of SS400 makes it a go-to material for projects requiring dependable, cost-efficient steel solutions.
Keywords: SS400 steel applications, structural steel for buildings, bridge construction steel, SS400 plate uses
Advantages of Using SS400 Steel Plate
SS400 steel offers several benefits for structural engineering projects:
- Cost-Effectiveness: Affordable compared to high-strength steels, reducing project costs.
- Weldability: Low carbon content ensures excellent weldability without preheating in most cases.
- Formability: Easily shaped and fabricated into various structural components.
- Availability: Widely available in various thicknesses and sizes, ensuring supply chain reliability.
- Versatility: Suitable for a broad range of structural and industrial applications.
These advantages make SS400 a practical choice for engineers balancing performance and budget constraints.
Keywords: SS400 steel advantages, cost-effective structural steel, weldable steel plates, SS400 formability
Limitations and Considerations
While SS400 is highly versatile, it has some limitations that engineers should consider:
- Corrosion Resistance: SS400 is not inherently corrosion-resistant and requires coatings or galvanization for outdoor or marine environments.
- Low-Temperature Performance: Not specifically designed for low-temperature applications; impact testing may be needed for such conditions.
- Strength Limitations: Compared to high-strength steels like SM490 or S355, SS400 has lower yield and tensile strength, limiting its use in high-load applications.
Proper surface treatments and design considerations can mitigate these limitations, ensuring SS400 performs reliably in intended applications.
Keywords: SS400 steel limitations, corrosion resistance structural steel, SS400 low-temperature performance
Comparison with Other Structural Steels
SS400 is often compared to other structural steels like ASTM A36 (USA) and S275 (Europe). While similar in composition and properties, key differences include:

- SS400 vs. ASTM A36: Both are low-carbon steels with comparable strength and weldability. A36 has slightly stricter chemical composition requirements.
- SS400 vs. S275: S275 offers higher yield strength (275 MPa minimum) but may be less cost-effective than SS400.
- SS400 vs. SM490: SM490, another JIS standard steel, provides higher strength but at a higher cost and reduced weldability.
Choosing SS400 over alternatives depends on project requirements, budget, and environmental conditions.
Keywords: SS400 vs ASTM A36, SS400 vs S275, structural steel comparison, JIS G3101 vs ASTM standards
Fabrication and Processing of SS400 Steel Plate Products Description
SS400 steel plates are easy to process due to their low carbon content and balanced mechanical properties. Key fabrication techniques include:
- Cutting: Laser, plasma, or flame cutting for precise shapes.
- Welding: Suitable for arc welding, MIG, and TIG welding with minimal risk of cracking.
- Forming: Can be bent or rolled into various shapes without compromising integrity.
- Machining: Moderate hardness allows for drilling, milling, and other machining processes.
Proper handling and storage are essential to prevent surface damage or rust, especially in humid environments.
Keywords: SS400 steel fabrication, welding SS400 plates, cutting structural steel, SS400 machining
Surface Treatments for SS400 Steel Plate
To enhance durability, SS400 steel plates often require surface treatments, especially for outdoor applications:
- Galvanizing: Applying a zinc coating to protect against corrosion.
- Painting: Using anti-corrosive paints for aesthetic and protective purposes.
- Shot Blasting: Cleaning the surface to remove rust and improve coating adhesion.
These treatments extend the lifespan of SS400 steel in harsh environments, such as coastal or industrial settings.
Keywords: SS400 surface treatments, galvanizing structural steel, anti-corrosive coatings SS400
Standards and Certifications
SS400 steel plates comply with JIS G3101 standards, ensuring consistent quality for structural applications. When sourcing SS400, engineers should verify:
- Mill Test Certificates (MTC): Confirm chemical and mechanical properties.
- Thickness and Dimensional Tolerances: Ensure compliance with project specifications.
- Third-Party Certifications: Validate quality through organizations like ISO or SGS.
Adhering to these standards ensures SS400 meets the structural integrity requirements of engineering projects.
Keywords: JIS G3101 standards, SS400 steel certifications, mill test certificates, structural steel quality
Sourcing SS400 Steel Plates
When procuring SS400 steel plates, consider:

- Reputable Suppliers: Choose suppliers with a track record of delivering JIS-compliant materials.
- Thickness and Size Availability: SS400 is available in thicknesses from 1.5 mm to 200 mm and various widths/lengths.
- Cost Considerations: Compare prices while ensuring quality certifications are met.
- Delivery Timelines: Verify supplier lead times to align with project schedules.
Engaging with trusted suppliers ensures consistent material quality and project success.
Keywords: sourcing SS400 steel, JIS G3101 steel suppliers, structural steel procurement
Conclusion
SS400 steel plate is a reliable, cost-effective, and versatile material for structural engineering projects. Its balanced mechanical properties, ease of fabrication, and wide availability make it a staple in construction, bridge building, and industrial applications. By understanding its properties, limitations, and best practices for use, engineers can leverage SS400 to achieve safe, efficient, and economical project outcomes.
For professionals seeking a dependable structural steel solution, SS400 offers an excellent balance of performance and affordability. Share your thoughts or experiences with SS400 in the comments below, and let's discuss how this material can enhance your next project!
Email: alloy@gneesteelgroup.com
WhatsApp (WeChat): +86-15824687445
FAQ
Q: What is JIS G3101 SS400 material?
A: JIS G3101 SS400 Structural Carbon Steel Plate Specification
JIS G3101 SS400 is one of the most common carbon structural steel grade, other grades of JIS G3101 are ss330, ss490, ss540. Related product type includes steel plate, steel sheet, steel sections, steel pipes, etc.
Q: What is JIS G3101 equivalent material?
A: There are a lot of JIS G3101 SS400 equivalent grades in the steel market. Among them, JIS G3101 SS400 equivalent ASTM is ASTM A36 steel and ASTM A283C steel.
Q: What is equivalent to SS400 steel grade?
A: Equivalent materials to the widely used SS400 include ASTM A36 and EN S275JR, both of which exhibit similar mechanical properties and are often utilized in similar applications.
Q: What is the hardness of JIS SS400?
A: SS400 is also soft in hardness due to its low carbon content. It is not recommended for use on main components with high strength, wear resistance or hardness. However, it has excellent weldability and machinability.
Q: What is the difference between 304 and SS400 stainless steel?
A: 304 stainless steel has a lower nickel content and may be mildly magnetic. Meanwhile, 400-series stainless steel is slightly magnetic, since it lacks nickel. This isn't a significant deciding factor when selecting a stainless steel fastener.
Q: Is SS400 low carbon steel?
A: SS400 is a low carbon steel without specified carbon content. According to its mechanical properties, it is similar to ASTM A36 which is extensively used in engineering and industrial applications. Structural JIS SS400 steel angle is relatively cost-less and shows well in major engineering projects.
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |






